Cabletron Systems 9033073 manual Mounting the Omni-directionalAntenna, Installing the Antenna

Installing the Antenna

Mounting the Antenna

Figure 4-2 Mounting the 14-dBi Antenna to a Wall

Direction of Maximum Signal

Backing Plate

Antenna Mounting Base

Flatwasher

Always place Flatwashers between nuts or bolts and Antenna Mounting Base!

Intermediate Plate (not included). Required when mounting antenna on a rough surface.

!

CAUTION

Always use flatwashers between the mounting screws/nuts and the plastic antenna mounting base. Avoid overtightening the mounting screws/nuts to prevent damage to the antenna mounting base.

Mounting the Omni-directional Antenna

It is recommended that you mount the RoamAbout 7-dBi Omni- Directional antenna to a mast. Proceed as follows:

1. Verify that you have the following items:

•

•

•

•

•

The RoamAbout 7-dBi Omni-Directional Antenna

A metal mounting bracket (included)

Two hose-clamps (included)

Nut and lockwasher (included)

A standard screwdriver or small wrench to tighten the nut on each hose-clamp

4-8 Outdoor Antenna Installation Guide