Cabletron Systems 9033073 manual Installing the Antenna, 1Mounting the 14-dBiAntenna to a Mast

Installing the Antenna

Mounting the Antenna

•

•

Four flatwashers and four nuts (included with antenna)

A socket wrench to tighten the nuts

2.Note the arrows on the plastic antenna mounting base.

3.Install the antenna with the arrows pointing up.

4.Attach the antenna mounting base and metal backing plate to the mast using U-bolts, clamps, flat washers and nuts as shown in Figure 4-1.

Always place flatwashers between nuts and the plastic

!antenna mounting base. Avoid overtightening the nuts to

CAUTION prevent damage to the plastic antenna mounting base.

5.Proceed to Connecting the Antenna Cable on page 4-10.

Figure 4-1 Mounting the 14-dBi Antenna to a Mast

Side View Direction of Maximum Signal

Clamp

Backing Plate

Antenna Mounting Base

Flatwasher

Always place flatwashers between nuts and the Antenna Mounting Base.

Top View

4-6 Outdoor Antenna Installation Guide