Cabletron Systems 9033073 manual Installation, E A B, The Antenna Cabling System

The Antenna Cabling System

RoamAbout Lightning Protector

Installation

To install the RoamAbout Lightning Protector:

1.Determine a suitable location for the Lightning Protector as described in Chapter 2 - Installation Guidelines.

2.As shown in Figure C-1, secure bracket (A) to the wall using two screws (F).

Figure C-1 Lightning Protector Installation

E

A

B

C		F
	D	G

3.Use a ring-terminal to connect ground-wire (C) to bolt (B). The ring-terminal and ground wire are provided by the installer.

4.Secure bolt (B) to the bracket using washers and locknut (D).

5.Loosely install washers and hexnut (G) onto the RoamAbout Lightning Protector (E).

C-6 Outdoor Antenna Installation Guide