Cabletron Systems 9033073 manual Mounting the Antenna, Mounting the Directional Antenna

Installing the Antenna

Mounting the Antenna

11.After verifying that the communications link is fully operational, secure all cables and use weatherproofing tape to seal all outdoor connectors.

Mounting the Antenna

The RoamAbout antennas are available as a RoamAbout 14-dBi Directional and a RoamAbout 7-dBi Omni-Directional. This section includes mounting instructions for each of these antenna types.

When mounting multiple antennas on a single mast, use the following methods to minimize cross-talk between antennas:

•

•

Place the antennas as far apart as possible.

Alternate the mounting of directional antennas for vertical and horizontal polarization (figures on the following pages illustrate mounting for vertical polarization).

Mounting the Directional Antenna

You can mount the RoamAbout 14-dBi Directional Antenna on a mast or on a flat vertical surface such as a wall. In most cases, mounting the antenna on a mast allows more flexibility in adjusting the height and direction of the antenna in order to better aim it at the opposite end of the wireless link.

Mounting on a Mast

To mount the RoamAbout 14-dBi Directional Antenna on a mast, proceed as follows:

1. Verify that you have all the items listed below:

•

•

•

The RoamAbout 14-dBi Directional Antenna

A metal backing plate (included with antenna)

Two U-bolts and two clamps (included with antenna)

Outdoor Antenna Installation Guide 4-5