Cabletron Systems 9033073 manual Sealing the Cable Connectors, Installing the Antenna

Installing the Antenna

Connecting the Antenna Cable

Sealing the Cable Connectors

Most problems associated with wireless outdoor installations are related to degrading performance due to the effects of corrosion of the antenna cable and cable connectors. To avoid this type of problem, always seal the cable connectors that are located outdoors using waterproof stretch tape.

You are advised to seal the connectors after you have verified optimal antenna alignment. Doing so will enable you to adjust antenna placement and cable routing without removing the tape.

1.Prepare the cable and connectors so that they are free from dust, dirt and grease.

2.Attach the tip of the weather proofing tape to the cable just above the connector.

3.Hold the tape in position, and stretch the tape and wind it half- lapped around the cable and connectors to form a void-free joint.

!

CAUTION

The degree of stretch can vary in different sections of the joint, as long as the overlaps accomplish a void-free application.

To protect the weatherproofing stretch tape from the effects of Ultra-Violet (UV) radiation (for example from direct sunlight), you should protect the joint with two half-lapped layers of any vinyl-plastic electrical tape. Alternatively, you can apply silicone sealer to protect the weatherproofing tape from sunlight, rain and other weather conditions.

4-12 Outdoor Antenna Installation Guide