>>LSU/Charger ?

>>Drum ?

LSU/Charger (LSU/Main charger cleaning mode setting)

This sets the cleaning mode for the LSU/Main charger. When the printing quality declines, cleaning the LSU/Main charger can restore the printing quality. This is primarily used for maintenance by service personnel.

1Press Z while >Service > is displayed.

2Press U or V repeatedly until >>LSU/Charger appears.

3Press [OK]. A question mark (?) appears.

4Press [OK] again. LSU/Main charger cleaning mode begins and

Please wait (Cleaning) is displayed.

5When cleaning ends, the display returns to Ready.

Drum (Drum/Refresh mode setting)

This sets the refresh mode for the drum. When the printing quality declines, refreshing the drum can restore the printing quality. This is primarily used for maintenance by service personnel.

1Press Z while >Service > is displayed.

2Press U or V repeatedly until >>Drum appears.

3Press [OK]. A question mark (?) appears.

4Press [OK] again. Drum refreshing begins and Please wait is displayed.

5When refreshing ends, the display returns to Ready.

6-88

Using the Operation Panel

Page 179
Image 179
Kyocera FS-C5100DN, FS-C5300DN, FS-C5200DN manual LSU/Charger ? Drum ?, LSU/Charger LSU/Main charger cleaning mode setting