Plastic Bag

Toner Feed Slot

3Put the old toner container in the plastic bag (contained in the toner kit) and discard it later according to the local code or regulations for waste disposal.

4Take the new toner container out of the toner kit.

5Shake the new toner container 5 or 6 times as shown in the figure in order to distribute the toner evenly inside the container.

Do not press too firmly on the center of the toner container or touch the toner feed slot.

6Set the new toner container in the printer as shown in the figure below.

7Push down on the top of the toner container to install it firmly in place. Use the same procedure to replace the other color toner containers.

8Close the top cover (top tray).

Note If the top cover (top tray) does not close, check that the new toner container is installed correctly (in step 7).

After use, always dispose of the toner container and the waste toner box in accordance with Federal, State and Local rules and regulations.

Proceed to the next section.

Maintenance

4-5

Page 70
Image 70
Kyocera FS-C5200DN, FS-C5300DN, FS-C5100DN manual Plastic Bag Toner Feed Slot