Kyocera FS-C5100DN Print Status Page ?, Understanding the Status, Using the Operation Panel

Print Status Page

>Print

Status Page ?

You can check the printer's current status, including available memory space and option settings by printing a status page.

1Press Z while Report Print > is displayed.

2Press U or V repeatedly until >Print Status Page appears.

3Press [OK]. A question mark (?) appears.

4Press [OK] again. The message Processing appears and the printer prints a status page.

	For a sample status page and its full description, refer to the next section
	Understanding the Status Page.
	Understanding the Status Page
	The numbers in the following diagram refer the items explained below the
	diagram. The items and values on the status page may vary depending
	on the printer’s firmware version.
	Status Page
	Printer
	FS-C5300DN		1
	Firmware version
	Paper Settings	Interface Block	5
2	Group Settings	Memory
			6
	Print Settings
		Emulation
	Device Common Settings		7
	Option Status
3		Counters	8
	Network
4		Toner Gauges
			9
Using the Operation Panel			6-13