Kyocera FS-C5100DN, FS-C5300DN, FS-C5200DN manual Https ? Off IPSec IPSec ? Off, IPSec IPSec setting

>>HTTPS ?Off

>IPSec

>IPSec ?Off

HTTPS (SSL Server HTTPS setting)

HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds SSL data encryption, message authentication and a digital signature function to the HTTP protocol used for data transfer between WWW servers and clients.

S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL. The default setting is Off.

1 Press Z while >SSL Server On > is displayed. >>HTTPS appears.

2Press [OK]. A blinking question mark (?) appears.

3Select On or Off using U or V.

4Press [OK].

5Press [MENU]. The display returns to Ready.

IPSec (IPSec setting)

IPSec (IP Security Protocol) is a security protocol adopted as the standard by the IETF for authentication and encryption in the third network layer (IP layer).

It can be used with both IPv4 and IPv6.

Note IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP addresses.

The default setting is Off.

Note Check with your network administrator when selecting net- work settings.

1After entering the administrator ID and password, press U or V repeatedly until >IPSec appears.

2Press [OK]. A blinking question mark (?) appears.

3Select On or Off using U or V.

4Press [OK].

5Press [Menu]. The display returns to Ready.

Security Level (Security Level setting)

Security Level is primarily a menu used by service personnel for maintenance work. There is no need for customers to use this menu.

Using the Operation Panel 6-67