>Duplex ? Off

>Override A4/LT ? Off

1Press Z while Print Settings > is displayed.

2Press U or V repeatedly until >Duplex appears.

3Press [OK]. A blinking question mark (?) appears.

4Press U or V to display the desired binding mode. The message display toggles through the following:

Off (default)

Short edge bind Long edge bind

5Press [OK].

6Press [MENU]. The display returns to Ready.

Override A4/LT (Overriding difference between A4 and Letter)

When the Override A4/LT is turned On using the operation panel, the printer ignores the difference between A4 and Letter paper sizes. Printing is performed without an error message even if the actual paper size in the current cassette differs from the paper size formatting the job.

By default, this feature is On.

1Press Z while Print Settings > is displayed.

2Press U or V repeatedly until >Override A4/LT appears.

3Press [OK]. A blinking question mark (?) appears.

4Select On or Off using U or V.

5Press [OK].

6Press [MENU]. The display returns to Ready.

Using the Operation Panel

6-37

Page 128
Image 128
Kyocera FS-C5100DN manual Duplex ? Off Override A4/LT ? Off, Override A4/LT Overriding difference between A4 and Letter