HOW TO OPERATE YOUR DIS~ASHER
step 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc. according to instructions in the Loading section.
step 2. Add detergent to the detergent dispenser.
Use rinse aid agent to help prevent spotting. (See How to Use a Rinse Agent section.)
Close and latch dishwasher door.
CYCLE PHASE
ENERGY MONITOR — TIME TO END OF CYCLE
SYSTEMS | I | CYCLES |
POT- NORMAL SHORT CHII
SCRUBBER WASH WASH CRVS
1111
,000[
Systems Monitor
/
Step 3. Select desired wash cycle. /
This panel tells you what is happening in the dishwasher and can alert you to some possible problems.
Information displayed:
●Selected wash cycle
●Selected dry option
●Minutes to end of cycle
●Cycle phase, such as WASHING, RINSING or DRYING
●Diagnostic codes to alert you to possible problems
●Relative energy used by each cycle. Lets you choose the cycle you need that uses the least energy.
See Systems Monitor section for explanation of displays and codes.
Touch the center of the pad.
●POTSCRUBBER is for items such as pots, pans and casseroles. Everyday dishes may be included.
●NORMAL WASH is for loads of everyday dishes with medium soils. Designed to yield high performance on normal loads.
●SHORT WASH is for most loads of everyday dishes with light soils or soils that have not dried on. It saves hot water over the higher performance cycles, thus saving energy.
●CHINA CRYSTAL is for lightly soiled china and crystal. The wash action is softened by pumping air along with the water to protect you] delicate items.
. RINSE & HOLD is for rinsing partial loads which will be washed later. Do not use detergent. Do not use DELAY START with
this cycle.
To change a setting, just touch
desired pad.
Your dishwasher is now automatically programmed including a Soil Option Selection. Cycle Indicator Lights tell you
the complete program and a number in the SYSTEMS MONITOR will tell you how long the cycle will t~e. If you’re satisfied, just touch the START pad.
6
