AT&T R1V2 manual Display Support, Assign Class-of-Service to an Attendant Console

5 Type t and at Port = , enter the new CSSPP for the DXS console.

6 At Action = , enter 1.

7 At Data = , enter

■1601 for the first DXS console

■1602 for the second DXS console.

Note When you move a DXS console, System 25 automatically reassigns the group select buttons you had administered for the previous port assignment. You do not have to readminister those buttons at the new port assignment.

To remove a selector	1 From the Main menu prompt, enter 1.
(DXS) console	2 At Port = , enter the		CSSPP for the selector console you
		want to remove.
	3	At Action = , enter	1.
	4	At Data = , enter 0.

Display Support

To assign or remove an

attendant Display ID

1 At Action = , enter 9 0 .

2 At Data = , enter the Display ID (not more than 11 characters, enclosed in double quotes), or “” to remove the ID.

Assign Class-of-Service to an Attendant Console

This procedure is the same as for multiline voice stations. See the procedure for assigning class-of-service options to multiline voice stations in Administering Voice Stations.

Administering Attendant Equipment 9-5