AT&T R1V2 manual Assigning Trunk Options to a Slac System, Display Support

Assigning Trunk Options to a SLAC System

The following options apply only to systems using the Switched Loop Attendant Console (SLAC), and are not administerable for DID trunks:

To set the priority of a trunk to ring in the attendant-console queue

1 At Action = , enter 11.

2 At Data = , enter a trunk priority number, 0-7:

■1 - highest priority

■7 - lowest priority

■0 - the trunk won’t ring in the queue The default is 0.

Specify which attendant should receive calls from this trunk

1 At Action = , enter 12.

2 At Data = , enter the attendant position number, 0-2:

■1 - first attendant

■2 - second attendant

■0 - either attendant The default is 0.

Display Support

To assign or remove a Note This feature is not administerable for DID trunks.

trunk Display ID

1 At Action = , enter 90.

2 At Data = , enter the Display ID (not more than 11 characters, enclosed in double quotes), or “” to remove the ID.

Administering Trunks 5-7