AT&T R1V2 manual 1PORT/PDC Administration, Voice Terminals Menu=1/2, Csspp, 16 0 for none

TABLE 16-1PORT/PDC Administration, Voice Terminals (Menu=1/2)

ACTION	DESCRIPTION	DATA
0	Physical port number	CSSPP
1	Enter terminal type code	[See Table 16-2]
2	Enter PDC	[1-9999]
3	Restrict dial access to CO trunk pool	[1=Y / 0=N]
4	Restrict dial access to all other trunk pools	[1=Y / 0=N]
5	Assign ringing line preference†	[1=Y / 0=N]
6	Assign prime line preference†	[Button Number, 7]
7	Assign call coverage receiver group‡	[1 - 32, 0 for none, or
		101-132 DGC receiver
		group, SLAC default is
8	Assign call coverage ring on no answer‡	0 for none]
		[1=Y / 0=N, SLAC
9	Assign call coverage ring on busy‡	default is 0 for none]
		[1=Y / 0=N, SLAC
10	Make this an extended station	default is 0 for none]
		[1=Y / 0=N]
11	Assign a group pickup number	[1-16;0 for none]
12	PDC of station to hunt to next	[PDC; 0 for none]
13	Restrict this station from making outward calls	[1=Y / 0=N]
14	Assign toll restriction class	[1-4;0 for none]
15	Assign ARS Facility Restriction Level	[0-3; 3]
16	Enable personal speed dialing	[1= Y/0=N]

51Display the number of any trunks assigned to this station for night service

52	Assign a trunk to this station for night service	[4-digit trunk number]
53	Delete a trunk from this station’s night	[4-digit trunk number]
	service list
60	For DTAC or SLAC: Display attendant	[1=1st Att./
	position number (Read-only)	2=2nd Att.]
90	Assign/remove PDC Display ID	[” 11 characters or less”,
		or “” to remove]

†Read-only feature for SLAC.

‡ Not administrable for SLAC.

16-4Command Reference