Quantum 3.5 manual StorNext Administration Tasks, Sharing a Library Between Applications

Appendix B

StorNext Administration

Tasks

Use the following information to perform specific file system configuration tasks that do not apply to a typical StorNext set up.

Sharing a Library Between Applications

If two or more software applications (on one or multiple machines), are configured to use the same library, then you must use the following procedure to enable the library to be shared and to prevent media being overwritten when these applications are used. This task must be performed when the Configuration Wizard (CW) is run during initial StorNext setup and configuration. For more information on using the CW, refer to the StorNext Installation Guide.

Note: For library sharing to be effective, the steps in the following procedure must be performed in the order in which they are presented.

You must have root privileges to perform this task.

StorNext 3.5 Installation Guide 114