Network Technologies CS-16/8 Appendix a Serimux Port Characteristics, Users, Administrator

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

Appendix A - SERIMUX Port Characteristics

Every port is defined through the following parameters:

Description		Acceptable Value			Default Value
Number	0-8/16/24/32			Same (not changeable)
Name		Up to 15 characters			“Port00” to “Port32”
Type – port 0		User			User (not changeable)
Type – except port 0		User or Host			Host
Baud rate – port 0	300-115200			9600
Baud rate – except port 0	50-128000			9600
Data bits per character – port 0	7,8			8
Data bits per character – except port 0	5,6,7,8			8
Stop bits – port 0	1, 2			1
Stop bits – except port 0	1, 1-1/2, 2			1
Parity	No parity, even, odd				No parity
Handshake mode (flow control)		Xon / Xoff (or in-band, or software),			None
		RTS/CTS (or out-band or hardware),
		Both,
		None
Xon character		any ASCII nonprintable character	(0-31 range)		Ctrl+Q (17)
Xoff character	any ASCII nonprintable character		(0-31 range)		Ctrl+S (19)
Inter-character delay – except port 0		1-60 milliseconds, none			None
(no delay allowed on port 0)
Line break receive allowance – except port 0		Yes or No			No
(no allowance for port 0)
Transmitted line break extra duration (added		No break transmitted, 1-999 milliseconds			No break transmitted
to 1 character transmission time) – except
port 0 (no extra duration for port 0)
In-band disconnect sequence		0 (disabled), 1, or 3 characters sequence			1-char sequence
1 character disconnect sequence		Any ASCII nonprintable character (0-31 range)			Ctrl+X (24)
3 character disconnect sequence		Any 3 ASCII characters			``` (3 back quotes)
Connection timeout		1-90 minutes, never			15 minutes
DTR output upon disconnect		Low, high, or pulsed for 0.5 seconds and then held			High
		high
Modem Reset string		Up to 41 characters			ATZ
Modem Initialization string		Up to 41 characters			AT&F&C1&D2S0=0
Modem Disconnect string		Up to 41 characters			ATH

Appendix B - SERIMUX User and Administrator Characteristics

The users and the administrator are defined through the following parameters:

Description		Acceptable Value		Default Value
Users:
User number		1 to 32		Same (not changeable)
User name		Up to 15 characters – case sensitive		“User01” to “User32”
User password		Up to 31 characters – case sensitive		“” (empty string)
User enabled		Yes or No		Not enabled, except
				User 1: enabled
Administrative privileges		Yes or No		No
Access to ports		Port 0 always; Ports 1-31		Port 0, except
				User 1: all ports
User menu timeout		1-90 minutes, never		15 minutes
Administrator:
Administrator name	“root” – case sensitive		Same (not changeable)
Administrator password	Up to 31 characters – case sensitive			“nti”
Administrator menu timeout	1-90 minutes, never			15 minutes
User to auto login		User 1-32, None		User 1

73