Network Technologies CS-16/8 operation manual 1 VT100, VT220 and Console Ansi Command Guide

Disconnect 2 ports		36
Attach or detach a modem		36
Reset SERIMUX Console Switch to default settings		36
4. USING THE TERMINAL		37
4.1 How To Setup The TERMINAL		37
4.1.1 Entering TERMINAL Setup		37
4.1.2 Saving and Exiting Setup		37
4.1.3 Setup Directory		37
4.2	Changing The TERMINAL Operating Parameters	38
F1- Disp SETUP Menu		38
F2- Genrl SETUP Menu		38
F3- Keybd SETUP Menu		39
F4- Comm SETUP Menu		39
F5- Misc SETUP Menu		40
F6-Tabs SET-UP Menu		40
F7- FKeys SET-UP Definition Setup Menu		40
F8- Ansbk SET-UP Menu		41
F9- Lan Setup Menu		41
F10- Colr1 Set-up Menu		41
F11- Colr2 Set-up Menu		42
4.3	Local Keyboard Commands	45
4.4 TERMINAL Command Guide		46
4.4.1 Commands Supported in ASCII Personalities		46
4.4.2 Variable Values for Table 8 Commands		53
4.5	ANSI Command Guide	57
4.5.1 VT100, VT220 and Console ANSI Command Guide		57
4.5.2 VT52 Command Guide		64
4.6	Using Printer Server via Ethernet Connection	65
4.6.1 Basic Setup		65
4.6.2 Setup for LPD		66
4.6.3 LPD printing		67
4.6.4 Setup for TFTP		67
4.6.5 TFTP Printing		67
5. HARDWARE INFORMATION		68
5.1	Hardware Specifications: TERMINAL	68
5.2	Hardware Specifications: SERIMUX	68
5.3	CPU-to-RACKMUX Ethernet Crossover Cable	69
5.4	Serial Port Cabling	69
5.5	Serial Port Pinouts	69
5.6	Cable Adapters	70
5.7	TERMINAL Connector Pin Assignments	72
INDEX		74
WARRANTY INFORMATION		74

iii