NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
Disconnect the administrator or a user with administrative privileges
Action (from Keypad) | Reaction of SERIMUX | |
1. | Press DISCON | - The LED “Discon” will illuminate. |
|
| - The port 0 LED will be illuminated, the other port LEDs will be OFF. |
2. | Press ADMIN | - The LED "Admin" will illuminate. |
3. | Press ENTER | - If command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate |
|
| together. They will turn OFF after 30 seconds or when any other key is pressed. |
- The message: “Disconnecting administrator now” will be displayed by the terminal application running on the former administrator port.
Login a user to the administrator main menu
Action (from Keypad) | Reaction of SERIMUX | |
1. | Press ADMIN | - The LED “Admin” will illuminate. The port 0 LED will be illuminated, the other port LEDs will |
|
| be OFF. |
2. | Press PORT | - The LED “Port” will illuminate. |
3. | Enter port number (00 by | - The corresponding port LED will illuminate, the other port LEDs will be OFF. |
| default) | - The LED “User” will illuminate. |
4. | Press USER | |
5. | Enter user number | - The corresponding port LED will illuminate |
6. | Press ENTER | - If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate |
|
| together. They will turn OFF after 30 seconds or when any other key is pressed. |
|
| - The administrator main menu (Figure 8, page 12) will be displayed on the terminal |
|
| application running on the administrator port. |
The “Administrator main menu” will be displayed on the serial device connected to the specified port if:
–the administrator is not logged in;
–the specified user has administrative privileges, is enabled, and is not logged in;
–the specified port is accessible to the user;
–the specified port is not otherwise already connected and the port type is “User”.
Login user to a port
Action (from Keypad) | Reaction of SERIMUX | ||
1. | Press USER | - The LED “User” will illuminate. | |
|
| - | The port 0 LED will be illuminated, the other port LEDs will be OFF. |
2. | Enter the user number | - The corresponding port LED will illuminate | |
3. | Press PORT | - The LED "Port" will illuminate | |
4. | Enter the port number | - The corresponding port LED will illuminate, the other port LEDs will be OFF. | |
5. | Press ENTER | - The User main menu will be displayed on the terminal application on the user port: (see | |
|
|
| Figure 22 on page 27 ) |
|
| - If the command is successful the “Admin”,”Port”,”Discon”.,”User” LEDs will illuminate | |
|
|
| together. They will turn OFF after 30 seconds or when any other key is pressed. |
The initial user screen will be displayed on the serial device connected to the specified port if:
–the specified user is enabled, and is not logged in at another port;
–the specified port is accessible to the user;
–the port is not otherwise already connected and the port type is “User”.
34
