Network Technologies CS-16/8 operation manual Port Settings, Port settings menu

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

FYI: RE: DscTime ( Disconnect Time)

The value shown in the Port list is derived from various sources depending on the type of connection active at the time.

-If a user is logged into a port as just a user, the time shown will be the remaining time based on the user's timeout setting.

-If a user is logged in with administrative privileges and performing administrative tasks, the time will be based on the administrator's timeout setting, not based on the user's timeout setting.

- If two ports are connected to each other, and one port has a lower timeout setting than the other, the lower setting will be shown in the DscTime column and control the connection.

-Press [N] to display port information for ports greater than 16, and then [P] to see the previous page.

-Press [R] to refresh the information displayed

-Press [Esc] or [Spacebar] to return to the Administrator main menu

3.1.3 Port Settings

From the Administrator main menu, press [2]-[x]-[Enter]] where x is the number of the port to display the port settings for.

Figure 10- The Port settings menu

14