Network Technologies CS-16/8 Connect the Serimux and Terminal to a Network, Monitor

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

1.4 Connect the SERIMUX and TERMINAL to a Network

To control the SERIMUX and TERMINAL through a network connected PC, connect a CAT5 Ethernet network cable to the connector marked "TERMINAL-10 BASE T". Then connect the other end of the Ethernet cable to a Local Area Network (LAN) through a 10/100 BaseT switch or hub (see Figure 4).

	VGA
	Multi-Scan
	Monitor
		Ethernet cable	LAN
			RJ45
Control Terminal				Network
			Male
			Connector	Server

R NETWORK		MONITOR		SERIAL	PRINTER		PARALLEL
NTI1275 Danner Dr	TECHNOLOGIES
	INCORPORATED
	Tel:330-562-7070
Aurora, OH 44202	Fax:330-562-1999
www.networktechinc.com								9	8	7
	16	15	14	13	12	11	10				6

TERMINAL-	RESET		ISP
10 BASE T
5	4	3	2	1	KEYBOARD

Rear View of SERIMUX-TERM-CS-16

Figure 4- Connect to a Local Area Network (LAN)

Alternatively, the TERMINAL may be directly connected to a PC using a CAT5 Crossover cable. See page 69 for specifications.

1.5 Connect the Monitor and Keyboard

Connect a VGA monitor and PS/2 keyboard to the connectors marked “MONITOR” and “KEYBOARD”.

Rear View of SERIMUX-TERM-CS-16

		R NETWORK		MONITOR		SERIAL	PRINTER		PARALLEL
			TECHNOLOGIES
NTI INCORPORATED
1275 Danner Dr			Tel:330-562-7070
Aurora, OH 44202			Fax:330-562-1999
	www.networktechinc.com						12	11	10	9	8	7
			16	15	14	13							6

TERMINAL-	RESET		ISP
10 BASE T
5	4	3	2	1	KEYBOARD

15HD male video connector

6 miniDIN male connector

VGA

Multi-Scan

Monitor

Monitor

PS/2 Keyboard

Figure 5- Connect User's Monitor and Keyboard

1.6 Power Up The SERIMUX-TERM-CS-16

1.Connect the powercord to a power source and power-ON the SERIMUX using the switch on the rear of the SERIMUX-TERM-CS-16.

2.Power-ON the connected VGA monitor.

7