Installation | Network Technologies CS-16/8 manual

NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH

1. INSTALLATION

1.1 Rack Mounting Instructions

This NTI switch was designed to be directly mounted in a rack and includes a mounting flange to make attachment easy.

Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch. Then secure the NTI switch to the rack using four #10-32 x3/4” screws (supplied). Each screw should be of sufficient length to go completely through the NTI mounting flange, rack frame and fully engage all threads in the captive nut. Be sure to tighten all mounting screws securely.

Do not block power supply vents in the NTI switch chassis (if provided). Be sure to enable adequate airflow in front of and behind the NTI switch.

Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.

#10-32x3/4" Rack Screws (supplied)

Rack

Cage Nuts

(supplied)

Figure 1- Mount Switch in a Rack

Page 10

Image 10

Network Technologies CS-16/8 Installation, Rack Mounting Instructions, #10-32x3/4 Rack Screws supplied Cage Nuts Supplied

Contents

SERIMUX-TERM-CS-16/8 Trademark Table of Contents 1 VT100, VT220 and Console Ansi Command Guide Table of Figures Terminal Converter FeaturesIntroduction Multiple RS-232 Emulations Console Switch Materials DB25M-RJ45F-C DB9F-RJ45F Features and Functions Front and Rear Views of SERIMUX-TERM-CS-16 Rack Mounting Instructions Installation#10-32x3/4 Rack Screws supplied Cage Nuts Supplied Powercord Connect Devices, Hosts, and PowerIEC Power Connector RJ45 Male Connector Connect the Monitor and Keyboard Power Up The SERIMUX-TERM-CS-16Connect the Serimux and Terminal to a Network Monitor Setup The Terminal Getting Started F4- Comm Setup Menu Saving and Exiting SetupF2- Genrl Setup Menu Connect to the Serimux Startup- Accessible host list Terminal Control Using the Serimux Console SwitchDefault keypad PIN number is Serial Control Administrator Controls Login as the administrator Port List Port list displays the status of all ports Port Settings Port settings menu Setting Description Value Stop Bit Port serial settingsData bit Parity Xon or Xoff Characters Flow control CommandInter-character delay DTR line behavior Display serial settings for different port number Modem settingsCopy Port Serial Settings Function Keystroke Port data buffer Display modem settings for different port numberClear Port data buffer User List User List User Settings User settings menu Copy User Settings Port accessOption Description Setting Description Value Advanced SettingsChange administrator password Local KeyPad PIN Defines the PIN number for Local Function Description FirmwareLoad new firmware Save current firmware Serimux is waiting to save its firmware User Accessible host list screen User Controls User main menu User main menu Limited user accessible Port list Port List screen ¾ Accessible host list User Terse modeTerse mode commands ¾ Connect to port ¾ Port info ¾ Verbose mode System Reset button¾ User Logout Firmware Upgrade Firmware upload window Last confirmation before firmware update Functions of the Keypad Login the administratorKeypad Control Action from Keypad Reaction of Serimux Login a user to the administrator main menu Login user to a port Connect 2 host ports Disconnect and logout a userAction from Keypad Disconnect 2 ports Reset Serimux Console Switch to default settingsTo detach a modem Using the Terminal How To Setup The Terminal F2- Genrl Setup Menu F1- Disp Setup MenuChanging The Terminal Operating Parameters F4- Comm Setup Menu F3- Keybd Setup MenuPrinter F6-Tabs SET-UP Menu F5- Misc Setup MenuF7- FKeys SET-UP Definition Setup Menu Printer RCV ON/OFF F10- Colr1 Set-up Menu F9- Lan Setup MenuF8- Ansbk SET-UP Menu Programmable Keys Attribute = Bold/Blink Color Association = OFF/ON Color Setup MenuF11- Colr2 Set-up Menu Option Color Palettes Palette Display Attribute Foreground Color Background Color Color Palettes Contd Local Keyboard Commands Command Enhanced PC Same Terminal Command GuideCommands Supported in Ascii Personalities Wyse Stop parity word Native Mode WyseSelect bell volume Key/fkey DEL ESC . cursor1 Sequence DELKey/fkey Sequence Sequence DEL Message CR Fcolor ESC a mf attrAttr Bcolor map Line col ColCcc C Clearing Data Editing ContdSending data Set Print FunctionsCharacter Sets Pp bb...bb Variable Values for Commands Variable Values for Commands Contd Definition LengthLine/Column Max Maximum Speed Palette Color Pallette Bell VolumeFunction Key Parity Bits 1 VT100, VT220 and Console Ansi Command Guide Ansi Command GuideSupported VT100,VT220 and Console Ansi Commands ESC Ps final Supported VT100, VT220 and Console Ansi Commands, ContdCharacter Set Selection Label assigned Values for Ps above Supported VT100, VT220 and Console Ansi Commands ContdFinal character Character Attribute Values for Psn in table on Editing Functions Clear Key Lock See tables below an on next page for values Kc/hc ST StringShifted function key Key Value Redefine keys with stringUnshifted function key Values of Fn for Numeric Keypad keys Auxiliary Keypad Modes More Terminal Control CommandsTerminal Resets Transmission/Printer Control See table below for values of Ps 2 VT52 Command GuideCommand VT52 Keyboard Language Using Printer Server via Ethernet Connection Basic Setup Setup for LPD LPD printing Setup for TftpTftp Printing Hardware Specifications Serimux Hardware Specifications TerminalHardware Information Serial Port Cabling Pin assignment at Wire Color Standard End Crossed EndCPU-to-RACKMUX Ethernet Crossover Cable Serial Port Pinouts RJ45 Signal Cable Adapters DB25F 3 4 Terminal Connector Pin AssignmentsSUB-D Female connector Mating face of an RJ45 Female Appendix B Serimux User and Administrator Characteristics Appendix a Serimux Port CharacteristicsDescription Acceptable Value Default Value Administrator Warranty Information Index

Network Technologies CS-16/8 operation manual Installation, Rack Mounting Instructions

Models: CS-16/8