TROUBLE SHOOTING GUIDE
Before calling for service, check the following items. If the problem still persists, contact Singer at www.singer.com
Problem | Cause |
| Correction | Reference | |
|
|
|
| ||
| 1.The machine is not threaded correctly. | 1.Rethread the machine. | Page 13 | ||
|
|
|
| ||
| 2.The thread tension is too tight. | 2.Reduce the thread tension (lower | Page 19 | ||
|
| number). |
|
| |
Upper thread | 3.The thread is too thick for the needle. | 3.Select a larger needle. | Page 22 | ||
|
|
|
| ||
4.The needle is not inserted correctly. | 4.Remove | and reinsert the needle (flat | Page 23 | ||
breaks | |||||
| side towards the back). |
| |||
|
|
| |||
|
|
|
| ||
| 5.The thread is wound around the spool | 5.Remove the spool holder and unwind | Page 13 | ||
| holder pin. | the thread from the spool holder pin. |
| ||
|
|
|
| ||
| 6.The needle is damaged. | 6.Replace the needle. | Page 23 | ||
|
|
|
|
| |
| 1.The bobbin case is not inserted correctly. | 1.Remove | and reinsert the bobbin case | Page 12 | |
Lower thread |
| and pull | on the thread. The thread |
| |
| should pull easily. |
| |||
breaks |
|
| |||
|
|
|
| ||
| 2.The bobbin case is threaded wrong. | 2.Check both bobbin and bobbin case. | Page 12 | ||
|
|
|
| ||
| 1.The needle is not inserted correctly. | 1.Remove and reinsert needle(flat side | Page 23 | ||
|
| towards the back). |
| ||
| 2.The needle is damaged. | 2.Insert a new needle. | Page 23 | ||
|
|
|
| ||
Skipped | 3.The wrong size needle has been used. | 3.Choose a needle to suit the thread. | Page 22 | ||
|
|
|
| ||
stitches | 4.The foot is not attached correctly. | 4.Check and attach correctly. | Page 20 | ||
|
|
|
| ||
| 5.The machine is not threaded correctly. | 5.Rethread the machine. | Page 13 | ||
|
|
|
| ||
| 1.The needle is damaged. | 1.Insert a new needle. | Page 23 | ||
|
|
|
| ||
| 2.The needle is not correctly inserted. | 2.Insert the needle correctly (flat side | Page 23 | ||
|
| towards the back). |
| ||
| 3.Wrong needle size for the fabric. | 3.Choose a needle to suit the thread and | Page 22 | ||
|
| fabric. |
|
| |
|
|
|
| ||
Needle breaks | 4.The wrong foot is attached. | 4.Select the correct foot. | Page 77 | ||
|
|
|
| ||
| 5.The needle clamp screw is loose. | 5.Use the screwdriver to firmly tighten the | Page 23 | ||
|
| screw. |
|
| |
| 6.The presser foot that is used is not | 6.Attach the presser foot that is appro- | Page 77 | ||
| appropriate for the type of stitch that | priate for the type of stitch that you wish |
| ||
| you wish to sew. | to sew. |
|
| |
| 7.The upper thread tension is too tight. | 7.Loosen the upper thread tension. | Page 19 | ||
|
|
|
| ||
| 1.The machine is not correctly threaded. | 1.Check the threading. | Page 13 | ||
|
|
|
| ||
| 2.The bobbin case is not correctly | 2.Thread the bobbin case as illustrated. | Page 12 | ||
Loose stitches | threaded. |
|
|
| |
3.Needle/fabric/thread combination is | 3.The needle size must suit the fabric and | Page 22 | |||
| |||||
| wrong. | thread. |
|
| |
|
|
|
| ||
| 4.Thread tension is wrong. | 4.Correct the thread tension. | Page 19 | ||
|
|
|
| ||
Seam | 1.The needle is too thick for the fabric. | 1.Select a finer needle. | Page 22 | ||
|
|
|
| ||
gather or | 2.The stitch length is adjusted wrong. | 2.Readjust the stitch length. | Page 28 | ||
pucker |
|
|
|
| |
3.The thread tension is too tight. | 3.Loosen the thread tension. | Page 19 | |||
| |||||
|
|
|
|
| |
