CHANGING THE PRESSER FOOT
1 
2
3
4
Attention: Turn power switch of off ("O") position when carrying out any of the operations shown below.
1Attaching the presser foot holder Raise the presser foot bar (a) by raising the presser foot lifter. Attach the presser foot holder (b) as illustrated.
2Attaching the presser foot
Lower the presser foot holder (b) until the
(d).
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will engage automatically.
3Removing the presser foot Raise the presser foot.
Raise the lever (e) and the foot will disengage.
4Attaching the edge/guilting guide The edge/quilting guide (g) can be attached as illustrated. Adjust as needed for hems, pleats, quilting, etc.
