THREADING THE UPPER THREAD

33 Guide the thread around the thread guide pulling the thread through the pre-tension spring as illustrated.

3

44. Thread the tension module by passing the thread between the silver discs.

4

55. Then, down and around the check spring holder.

5

66. At the top of this movement, pass the thread from right to the left through the slotted eye of the take-up lever and then downwards again.

6

77. Pass the thread behind the flat, horizontal thread guide.

Guide the thread through the thread guide located above the needle.

Pull the end of the thread through the needle from front to rear, and pull out about 10 cm of thread.

Use the needle threader to thread the needle. (On the next page.)

7

￿￿

Page 19
Image 19
Singer H74 instruction manual Threading the Upper Thread