BAR TACK STITCH
D |
|
|
1
2 |
11 Select pattern 32 of from the Group Patterns "B" to get the bar tack stitch. Change the presser foot to the buttonhole foot.
22 Pull the button holder to the rear. Set the button guide plate on the buttonhole foot to the desired length.
33 Position the fabric so that the needle is 2mm (1/16") in front of where you want the sewing to start, and then lower the presser foot.
2mm
3 | $ # |
44 Pass the upper thread down through the hole in the presser foot. Pull down the buttonhole lever. The buttonhole lever is positioned behind the bracket on the buttonhole foot. Gently hold the end of the upper thread in your left hand, and then start sewing.
4
5
55 Bar tack stitches are sewn.
66 As an example, the illustration shows the procedure for sewing bar tacks at pocket corners.
6
