DARNING STITCH
D |
1
NOTE |
Make no |
gap here |
11 Select pattern 29 or 30 from the Group Patterns "B" to get the darning stitch. Change the presser foot to the buttonhole foot.
22 B a s t e t h e u p p e r f a b r i c a n d t h e reinforcement fabric together. Select the width of the pattern by using the stitch width button. Lower the presser foot over the center of the tear.
2
3 |
|
|
|
| Stop |
| Stop |
|
| ||
Start | Start | ||
4 |
|
|
|
33. Pull the button holder to rear. Set the button guide plate on buttonhole foot to the desired length.
44. The size of the darning cycle is variable. However, the maximum stitch length is 2.6cm (1 inch) and the maximum stitch width is 7mm (9/32 inch).
a. The length of darning pattern.
b. The width of darning pattern.
