INSERTING THE BOBBIN
1
A
2
B 
A
3
B 
C
4
Attention: Turn power switch to off ("O") before inserting or removing the bobbin.
When inserting or removing the bobbin, the needle and presser foot must be fully raised.
11 Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction (arrow).
22 Pull the thread through the slit (A).
33 With a finger held gently on top of the bobbin.
Draw the thread at the arrow markings into the stitch plate thread guide from (A) to (B).
44 Pull the thread at the arrow markings into the stitch plate thread guide from (B) to (C).
To cut off excess thread pull thread back over the cutting off blade at point (C). Close the bobbin cover plate.
