Side Cutter, Roller Foot, Straight Stitch Foot | Singer H74 specs

SIDE CUTTER

5 7 B-10

* The Side Cutter is an optional accessory.

This foot is used to trim excess material while sewing.

1.Attach the Side Cutter, making sure the cutter's "arm" fits around the needle bar thumb screw. Tighten the thumb screw, securing the foot.

2.Slowly turn the handwheel towards you; the needle should go over the stitch finger on the foot. If the needle is hitting the metal stitch finger or metal side, then widen or narrow the stitch width. Never use a straight stitch.

3.Cut a 1/2" wide by 1"deep notch at the top edge of your fabric.

4.Place the fabric OVER the first metal platform and then UNDER the second metal platform. If the foot is not cutting, it is usually because the material is not placed OVER the first metal platform.

5.Sew slowly and gently guide the fabric. The Side Cutter Foot works best if no more than 1/2" is being trimmed.

ROLLER FOOT

1								* The Roller Foot is an optional accessory.

This foot includes built-in rollers to help feed difficult-to-sew fabrics such as leather, suede and vinyl.

1.Manually lead the thread from the needle through the opening of the foot, and then slip the thread under and behind the foot.

2.Use double-faced (basting) tape to hold the fabric pieces together for sewing, which will prevent either layer from slipping.

3.Place fabric under the presser foot. Lower the presser foot and sew.

STRAIGHT STITCH FOOT

1	* The Straight Stitch Foot is an optional accessory.

This foot is used when sewing lightweight fabrics, such as chiffon and silk. It will help prevent the fabric from being pulled into the needle plate opening.

1.Verify that the needle will line up with the opening of the foot before starting to sew.

2.Sew slowly and guide the layers.

Image 63

Singer H74 instruction manual Side Cutter, Roller Foot, Straight Stitch Foot

Contents

Page Symbol Instructions Important Safety Instructions Contents Contents Principal Parts of the Machine Machine Control Buttons Operation buttons see page 24/25/26Function buttons see page 27/28/29 Selection buttons see page 30/31 Alphabet LCD Screen Elongation Memory Patterns Pattern Chart Alphabets Accessories StandardOptional Connecting the machine Connecting the Machine to the Power Source Bobbin winding Winding the Bobbin Winding the Bobbin Inserting the Bobbin Threading the Upper Thread Threading the Upper Thread Using the Needle Threader Cutting the Thread Drawing UP the Lower Thread TWO-STEP Presser Foot Lifter Adjusting Presser Foot Pressure Starting Sewing Start/stop buttonFoot control Thread Tension Changing the Presser Foot Application Needle Presser Foot Presser Foot Chart Please Note Raise or Lower the Feed Dogs Replacing the Needle Operation Buttons Reverse button Auto-lock button Needle up/down position button Function Buttons Function Buttons Twin needle button see Mirror button see Selection Buttons Memory button Clear button Edit button Free arm Sewing TipsSewing corners Reverse More Features Installing the extension tableSewing on heavy fabrics Zigzag Stitches Needle Position and Stitch Length Stretch Stitches Using the overcasting foot Using the all purpose footOvercasting Stitches Blind Hems Button Sewing Buttonhole Sewing Lightly hold the end of the upper thread and start sewing 17 B-18 19 B-20 B-21 22 B-23 B-24 25 B-26 Making corded buttonholes BAR Tack Stitch Eyelet Stitch Darning Stitch 2mm Inserting a centered zipper Zipper Insertion Inserting a lapped zipper Narrow Hemming Rolled hem foot is an optional accessory Single cording Triple cording Cording Satin Stitch Sewing EDGE/QUILTING Guide Straight Stitch Foot is an optional accessory Gathering Gathering foot is an optional accessory Smocking Darning Free Motion Sewing Monogramming Embroidery Walking Foot Side Cutter Roller FootStraight Stitch Foot Open TOE Foot Piecing FootEdge Joining Foot NON-STICK Foot Invisible Zipper Foot Decorative Topstitching Fagoting Scallop Stitch Scallop hemScallop edging Elongation Mirror Image Regardless of what kind of sewing will be carried out Using the Twin Needle Combining patterns or letters Memory Adding patterns or letters Clearing patterns or letters Editing patterns Recalling and sewing the memorized pattern Instruction animation message display Sewing machine is experiencing a problem Return bobbin winder shaft to left Buzzer Sound Cleaning the hook MaintenanceCleaning the screen Cleaning the sewing machine surface Maintenance Problem Cause Correction Trouble Shooting Guide Problem Cause Correction Reference Stitch Adjustment Reference Chart Group patterns-10 Direct patternsGroup patterns-50 Darning Group patterns-66 Auto 021H7A0101 Apr/11 Singer H74H74A/B5