WARNING FUNCTIONS
Warning beeping sound
-When operating correctly: 1 beep
-When the memory is full 20 units of pattern:
-When operating incorrectly:
-When the sewing machine is in trouble and can't sew: 8 seconds short beeps
It means that the thread is twisted or jammed and the hand wheel axle can't move. Please refer to the "Trouble shooting guide" on pages 75 & 76 for solutions. After the problem has been solved, the machine will continue to sew.
Return bobbin winder shaft to left
If the bobbin winder shaft is positioned to the right (engaged) and any button is pressed a 3- beep warning will be sounded. Move bobbin winder shaft to the left (disengaged) to allow the buttons to be operational.
Please Note: If the problem is not resolved, please contact SINGER at www.singer.com.
Attention: If the thread gets jammed inside the hook during sewing, stopping the needle from moving, the security switch will stop the machine completely. In order to restart the sewing machine, you will have to turn the on/off switch to the OFF position and then ON again.
