Quantum 3.5 manual Labeling Disks

Chapter 4 Configuring StorNext

Windows Configuration Utilities

•Click Label to write a volume label to the selected device(s) (see Labeling Disks below).

•Click UnLabel to remove the existing volume label from the selected device(s).

•Click Exit to quit the Disk Device Labeler utility.

•Click Probe Disk(s) to pulse the activity light of the selected device(s). Use this feature to correctly identify disks before labeling them.

•Click Clear Selections to deselect all devices in the list.

Labeling Disks

When you select one or more disks and click Label, a confirmation screen appears asking if you are sure you want to proceed. Click OK to continue. The Disk Labeler dialog box appears (figure 42). Table 19 describes the fields on the on the Disk Labeler dialog box.

Figure 42 Disk Labeler Dialog

Box

Table 19 Disk Labeler Dialog	Field / Button	Description
Box
	New Disk Label	Type the label for the disk.
	New Sectors	(Optional) Type the number of sectors on the
		disk.
	Create Label	Write the new label to the disk and proceed to
		the next selected disk.

StorNext 3.5 Installation Guide 84