Quantum 3.5 Click to deselect all devices in the list, Click to select all devices in the list

Chapter 4 Configuring StorNext

Windows Configuration Utilities

(figure 43). Table 20 describes the fields on the Simple Configuration Setup window.

To configure a simple file system, select the disks to use in the configuration. Specify settings (file system name, block size, stripe size, and maximum connections), and then click Configure.

Figure 43 Simple File System

Configuration

Table 20 Simple File System	Field / Button	Description
Configuration
	Clear Selections	Click to deselect all devices in the list.
	Select All	Click to select all devices in the list.
	File System Name	Type the name of the file system. This is the
		name used by clients when establishing a
		mount point for the file system.
	File System Block	Select the file system block size (in bytes). This
	Size	is the minimum allocation size used by the file
		system.
	Stripe Size in Blocks	Select the stripe size (in blocks). This is the
		number of file system blocks to write before
		switching to the next disk in the stripe group.

StorNext 3.5 Installation Guide 86