Quantum 3.5 manual Client Configuration, Mount Point

Chapter 4 Configuring StorNext

Windows Configuration Utilities

	The Client Configuration utility lets you view and modify properties for
Client Configuration
	the StorNext client software. Use the utility to specify mount points and
	mount options, set various cache settings, and configure a distributed
	LAN server or a distributed LAN client.
	To run the Client Configuration utility, on the Windows Start menu, click
	All Programs > StorNext File System > Client Configuration.
	The Client Configuration utility includes four tabs:
	• Mount Point on page 71
	• Distributed LAN on page 73
	• Advanced Mount Options on page 75
	• Advanced Cache Options on page 79
	Click a tab to view or modify StorNext client properties. After making
	changes on one or more tabs, click OK to save the changes. A message
	appears prompting you to restart the system. Click Yes. Most changes do
	not take affect until the system is restarted.
	Mount Point
	StorNext file systems can be mapped to a drive letter or to a folder. When
	mapping to a folder, the folder must be empty or non-existent, and must
	exist within an NTFS file system (e.g., C:\Mount\MySnfs).
	Use the Mount Point tab (figure 37) to specify drive mappings. Table 15
	describes the fields on the Mount Point tab.
	Note: Make sure the host list is the same for all clients on the SAN.
	An incorrect or incomplete host list may prevent the client
	from connecting to the file system.

StorNext 3.5 Installation Guide 71