Quantum 3.5 Creating an Override Configuration, Using Distributed LAN Client and Server Commands

Table 14 Distributed LAN Client and Server Commands

Chapter 4 Configuring StorNext

Configuring a Distributed LAN Client Server

Creating an Override Configuration

By default, the settings specified in the dpserver configuration file are used for all file systems mounted by the distributed LAN server. To use different settings for a file system, create an override configuration file for that file system. At the command prompt, type:

./sndpscfg -E <file system>

where <file system> is the name of the file system to which the override settings apply. Edit the configuration file, and then save and exit. A new configuration file with the name dpserver.<file system> is created in the /user/cvfs/config/ directory.

Using Distributed LAN Client and Server Commands

Use the cvadmin commands described in Table 14 to see information about distributed LAN servers and clients. (For more information about using cvadmin commands, see the CLI Reference Guide.)

Command	Description
proxy	Lists all distributed LAN servers for the
	currently selected file system.
proxy long	Lists all distributed LAN servers for the
	currently selected file system, as well as
	tunable parameters and attached disks.
proxy who <distributed LAN	Lists distributed LAN servers connected
client>	to the specified distributed LAN client, as
	well as current I/O statistics.
proxy who <distributed LAN	Lists distributed LAN clients connected to
server>	the specified distributed LAN server, as
	well as current I/O statistics.

StorNext 3.5 Installation Guide 69