Philips AJ3130/05 manual Setting the Alarm Sleep, Maintenance

SETTING THE ALARM SLEEP

Canceling the Alarm Completely

•Before or during the set alarm time goes off, push the ALARM switch to OFF position.

™Alarm indicator disappears from display.

SLEEP

About Sleep

The clock radio has a built-in timer called SLEEP, which enables the radio to be automatically switched off after 59 minutes. SLEEP allows you to lie back, listen and fall asleep.

Setting and switching off Sleep

1.Check that the clock control is in the CLOCK position.

2.Set RADIO to OFF position.

3.Set your sleep time by pressing once on the SLEEP key.

• The display shows the sleep period 0: 59.

4.To cancel the sleep function before the sleep period ends, press SLEEP OFF /REPEAT ALARM.

Note: - The sleep function does not affect the alarm setting.

-If during SLEEP you have turned down the volume and you have an alarm set in the radio mode, make sure you have adjusted the volume loud enough to wake you up the following day!

MAINTENANCE

•If you do not intend to use the clock radio for a long time, disconnect the set by withdrawing the plug from the wall socket. The battery should also be removed to prevent chemical leakage which will damage your set.

•To clean your set from fingerprints, dust and dirt, use a clean and soft damp cloth or chamois leather. Do not use cleaning products which contain, benzene, thinner, etc. as these may harm the housing.

English

9