Samsung SRD-852D user manual Event Monitoring, Stop alarm

EVENT MONITORING

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 50)

•If multiple events occur simultaneously, the screen will switch to a split mode.

-2~4 events : 4-split mode

-5~9 events : 9-split mode

-10~16 events : 16-split mode

•If the second event occurs within the set time of <Event Display>, the first event will last until the second one is terminated. (Page 50)

 Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.

Event occurrence 5 seconds

Stop alarm

CH1

Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event occurred in CH 1.

Event occurrence 4 seconds 9 seconds

Stop alarm

CH1CH2

CH1

M Press the [ALARM] button to reset the alarm settings and to release the event mode.

If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be performed.

This will also apply to the Spot Out monitor.

 LIVE

English _33