Connecting and Setting the Network

You can set the DDNS site for a remote user’s network connection.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Network> window to move to <DDNS>, and press [ENTER] button.

2.Use virtual keyboard to enter user inputs.

Refer to “Using Virtual Keyboard”. (Page 36)

If selected <OFF> or <Samsung DDNS>, input ﬁelds are deactivated.

If you select <Samsung DDNS>, the “DDNS host address” item will be displayed.

3.When the DDNS setup is done, press <OK>.

M Refer to <DDNS Setting>. (Page 63)

Networking may differ from the connection method, check your environment before setting the connection mode.

•Static IP mode

-Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user.

-DVR Network Settings : Set the <Connection Mode> in

 Consult your network manager for IP, Gateway and Subnet Mask.

•Dynamic IP (DHCP) mode

-Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.

-DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to <Dynamic IP>.

•ADSL (PPPoE: ID and password certiﬁcation)

-Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection requires user ID and password.

-DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to <ADSL>.

ADSL <User ID> and <Password> should be the same to the ADSL user information.

If you don’t know the ID and password, consult your ADSL service provider.