using the DVR

IP, Gateway, Subnet Mask, and DNS

-For <Static IP> : You can directly input IP address, Gateway, Subnet Mask and DNS.

-For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.

-For <ADSL> : IP address, Gateway, and Subnet Mask are set automatically.

User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”.

Connection Mode

 

 

Connection

Protocol

 

 

x Connection Mode

ADSL

 

 

x Bandwidth

600kbps

 

 

x IP

192.168. 1.200

 

x Gateway

192.168. 1.

1

 

x Subnet Mask

255.255.255. 0

 

x DNS

Manual

168.126. 63.

1

x User ID

ID

 

 

x Password

********

 

 

 

OK

Cancel

 

MDNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.

6.When the connection setup is done, press <OK>.

Setting the Protocol

1.

Use the up/down buttons (

) in <Network> window to

 

move to <Connection Mode>, and press [ENTER]

2.

button.

 

Select <Protocol>.

 

3.

Use direction buttons (

) to move to a desired

 

item, and set the value.

 

Protocol Type : Select the protocol type between TCP and UDP.

If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.

Connection Mode

 

 

 

Connection

Protocol

 

 

x Protocol Type

TCP

 

 

 

x Port(TCP)

554

 

~

558

x Port(UDP)

8000 ~ 8160

 

 

x Unicast/Multicast

Unicast

 

 

 

x Multicast IP

224.126.

63.

1

 

x TTL

5

 

 

 

x Webviewer Port

80

 

 

 

 

 

OK

 

Cancel

Port (TCP) : Initially, <554~558> is set. It increases / decreases by 5.

-TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.

Port (UDP) : Initially, <8000~8160> is set. It increases / decreases by 160.

-UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.

Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.

-Unicast : Transfers data (UDP, TCP) individually to each connecting client.

-Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network.

Multicast IP : User can directly input.

TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

4.When the protocol setup is done, press <OK>.

60_ using the DVR

Page 60
Image 60
Samsung SRD-852D user manual Setting the Protocol, Move to Connection Mode, and press Enter