installation

If adding HDDs

The following figures are based on Model SRD-1652D.

1.First, loosen the screws on both sides and remove the cover.

Cover

2.Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets.

3.Install HDDs (x3) on the upper bracket and fix them with screws.

Upper Bracket

Lower Bracket

Upper Bracket

Lower Bracket

16_ installation

Page 16
Image 16
Samsung SRD-852D user manual If adding HDDs, First, loosen the screws on both sides and remove the cover