Samsung SRD-852D user manual Record Option, Setting Event Recording Properties, Auto Delete

using the DVR

Setting Event Recording Properties

You can set each channel’s resolution, quality and IPS for event recordings.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Record> window to move to <REC Quality & Resolution>, and press [ENTER] button.

2.Select <Event>.

Event recording setup window appears.

3. Use direction buttons (	) to move to a desired
item, and select it.

•Resolution : Sets the resolution of the recorded screen.

If you set the resolution to <4CIF(L)>, up to 4 channels are supported.

REC Quality & Resolution

Standard	Event
Remaining count : 4CIF(L) : 0		2CIF(M) : 0		CIF(S) : 0
CH	Resolution		Record Rate	Record Quality
1	CIF(S)		7.5ips	Level4
2	CIF(S)		7.5ips	Level4
3	CIF(S)		7.5ips	Level4
4	CIF(S)		7.5ips	Level4
5	CIF(S)		7.5ips	Level4
6	CIF(S)		7.5ips	Level4
7	CIF(S)		7.5ips	Level4
8	CIF(S)		7.5ips	Level4
				Previous/Next Page
		OK	Cancel

•Record Rate : Image Per Second, means the frames recorded per a second.

•Record Quality : Sets the recording quality.

M The remaining rate for each channel displayed in DVR is a sum of frame rates in both standard recording and event recording.

You cannot increase the remaining count if the current remaining count has reached zero or there is no available remaining count from any other page. If this is the case, reduce the remaining count for the current page, or do so for the same channel on any other page.

Only if the resolution is set to 4CIF, you can select Level 9 for the recording quality.

4.When the Event recording setup is done, press <OK>.

Record Option

You can set the recording to stop or overwrite when the HDD is full.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Record> window to
2.	move to <Record Option>, and press [ENTER] button.
	Use direction buttons (	) to move to a desired

Record Option

x Disk End Mode Overwrite

item, and set the value.

•Disk End Mode : If selected <Overwrite>, recording will continue despite the HDD full while overwriting the oldest. If selected <Stop>, the recording will stop when the HDD is full.

•Disk End Beep : If selected <Stop>, the button is activated. If you check it, the beep will sound on the disk full and the recording stops.

x

Disk End Beep

Auto Delete

The recording information will be deleted.

Do you want to proceed?

OK	Cancel
OK	Cancel

•Auto Delete : If you check it, Record Period setup is activated.

If you specify the auto deletion period, the recording data before the period will be deleted automatically. (This option will be enabled only if Disk End Mode is set to “Overwrite”.)

3.When the recording option setup is done, press <OK>.

54_ using the DVR