Samsung SRD-852D user manual Formatting, HDD Alarm, You can format a storage device, Select Format

Formatting

You can format a storage device.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <Format>.

A window for selection of device for formatting appears.

3. Use direction buttons (	) to select a device to be
formatted.

4.Select <Format> on the bottom of the screen.

Press <OK> on the “Manage” confirmation window will start formatting the selected device.

5.When the formatting is done, press <OK>.

Storage Device
Device	Format		HDD Alarm
Device	Select		Used/Total	Usage
HDD	1	12.28G/499.37G		Internal
CD / DVD	–		0 / 0	Backup
				
Format				USING
		OK	Cancel	THE DVR

Storage Device

Device	Format	HDD Alarm
Device	Select	Used/Total	Usage
HDD	1	12.28G/499.37G	Internal
CD /	Manage
	Formatting deletes all recordings.
	Proceed formatting?
	OK	Cancel
Format

OK Cancel

HDD Alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <HDD Alarm>.

A window for setting HDD check and replace output ports and their durations appears.

3. Use direction buttons (	) to move to the desired
item.

•Alarm

-Alarm signal will output through the alarm out port on the rear side when selected <1>, <2>, <3>, and <4>.

Storage Device
Device	Format		HDD Alarm
x Check Alarm Output Port		1	2	3
		4	BEEP	All
x Duration		OFF
x Replace Alarm Output Port		1	2	3
		4	BEEP	All
x Duration		OFF
		OK	Cancel

-If <BEEP> was selected, a beep will sound.

-If <All> was selected, both beep sound and alarm signal through rear side ports will output.

•Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

•Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

English _47