English _51
USING THE DVR

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
Use the up/down buttons (

) in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Spot Out>.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
Spot Out 1 : Specify a single channel for output.
You can set the dwell time between the screen switching in
“Setting the Device > Camera > SEQ-Dwell Time”.
(Page 44)
You can setup using the mouse right button in Live screen.
Refer to “Spot Out”. (Page 31)
When the Spot Out is done, press <OK>.

Setting the Screen Mode

You can confi gure the Live screen and Split Screens.
Using the mouse may help make setup easier.
Use the up/down buttons (

) in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Mode>.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
Live Screen : Select split modes for the Live screen.
16-, 9-, and 4-split screens are included by default.
Play Screen : Select split modes for the playback screen.
Only the 13-split screen is optional.
Black shows the playback while white shows the Live
screen.
When the screen mode setup is done, press <OK>.
1.
2.
3.
•
M
4.
1.
2.
3.
•
•
4.
Monitor
Spot Out
Monitor
x Spot Out 1 Single
Mode
OK Cancel
Set Mode
Set Mode
Set Mode
Set Mode
CH 1
Monitor
Mode
Monitor Spot Out
OK Cancel
Live Play
Live Screen
Play Screen
Monitor
Spot Out
Monitor
x Spot Out 1 Single
Mode
OK Cancel
Set Mode
Set Mode
Set Mode
Set Mode
CH 1
Set Spot Out
OK
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16