12ENGLISH
Basic Installation Procedure
Connecting the Wireless Base Station
1.Connect the LAN: You can connect the Wireless Base Station to your PC, or to a hub or switch. Run Ethernet cable from one of the LAN ports on the front of the Wireless Base Station to your computer’s network adapter or to another network device.
You may also connect the Wireless Base Station to your PC (using a wireless client adapter) via radio signals. Position both antennas on the back of the Wireless Base Station into the desired positions. For more effective coverage, position one antenna along the vertical axis and the other antenna along the horizontal axis. (The antennas emit signals along the toroidal plane – and thus provide more effective coverage when positioned along different axes.)
2.Connect to the Internet: Prepare an Ethernet cable for connecting the Wireless Base Station to a cable/DSL modem or Ethernet router. Prepare a serial cable for connecting the Wireless Base Station to an ISDN TA or PSTN modem.
3.Power on: Connect the power adapter to the Wireless Base Station.
