Characters, Default Fully Automatic | Philips CPWBS001 instruction

	ENGLISH 41

Note:	The SSID is case sensitive and can consist of up to 32 alphanumeric
	characters.
	Transmission Rate: Set the data rate transmitted from the Wireless Base
	Station.The lower the data rate, the longer the transmission distance.
	(Default: Fully Automatic.)
	Basic Rate: The highest rate specified is the rate the Wireless Base Station
	will use when transmitting broadcast/multicast and management frames.
	Available options are: 1, 2, 5.5, and 11Mbps. (Default: All.)
	Channel: The radio channel through which the Wireless Base Station
	communicates with PCs in its service range. (Default: Auto).
Note:	The available channel settings are limited by local regulations.
	Broadcast SSID: Broadcasting the SSID on the wireless network for easy
	connection with client PCs.
	(Default: Enable)

Image 41

Philips CPWBS001 manual Characters, Default Fully Automatic, Available options are 1, 2, 5.5, and 11Mbps. Default All

Contents

Wireless Base Station ➊ ➋ Helpline Table of Contents Power Reset buttonIndicator LEDs Technology for people Packaging contents Safety PrecautionsImportant information Environmental information Disclaimer Station until the Setup Wizard asks you to do so Do not make any hardware connections to the Wireless BaseStart installing the software You make any hardware connections How to use the Setup programme Hardware description Connect the System System Requirements Connecting the Wireless Base Station Basic Installation Procedure Attach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Ends for all connections Attach the Wireless Base Station to the InternetModem / Internet port on the Wireless Base Station Connecting the Power Adapter Windows Installing TCP/IPSetting Up TCP/IP Configuring Your Computer in Windows 98SE/Me Obtain IP Settings from Your Wireless Base Station Dhcp IP Configuration Configuring Your Computer in Windows Dhcp IP Configuration Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration for all Windows OS Ping Verifying Your TCP/IP Connection Internet Explorer 5 or above Browser ConfigurationDisable Proxy Connection Internet Explorer for Macintosh Making Configuration Changes Setup, virtual DMZ hosts, and other advanced functionsNavigating the Web Browser Interface DSL modem Time Zone Setup WizardBroadband Type Cable Modem PPPoE xDSL Fixed-IP xDSL Pptp Point-to-Point Tunneling Protocol Click Finish to complete the setup Menu Description System Password Settings Default 9 minutes Factory defaults. The default is no passwordRemote Management Base Station Dynamic IP Internet Settings Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Channel and Ssid Wireless Available options are 1, 2, 5.5, and 11Mbps. Default All Default Fully AutomaticCommunicates with PCs in its service range. Default Auto Available channel settings are limited by local regulations Encryption Address Mapping Network Address Translation NAT Virtual Server 6112 Special ApplicationsBattle.net 28800 Firewall Access Control MAC Filtering Table As shown in the following screen Parental Control Schedule Rule Use this section to create your network schedule rules Enables Schedule-based Internet access control Intrusion Detection Firewall Configuration DMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration Tools Tools Firmware Upgrade Complete when the power LED stops blinking Tools Reboot Status Following items are included on this screenSection Description Displays Internet connection type and status Am getting an IP Address that starts with Troubleshooting 10/100 LED does not light after a connection is made Have another IP Address displayed LED Indicators Media Access ControlRF Specification Standards RF Power Consumption RF Output PowerRF Frequency Operating Channel English 0682