Point-to-Point Tunneling Protocol Pptp | Philips CPWBS001 instruction

36ENGLISH

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol (PPTP) can be used to join different physical networks using the Internet as an intermediary. Using the above screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP client on each client PC.

Enter the assigned IP address, subnet mask and default gateway IP address (usually supplied by your ISP), and then the PPTP User ID, Password and PPPTP Gateway IP address.

The MTU (Maximum Transmission Unit) governs the maximum size of the data packets. Leave this on the default value (1460) unless you have a particular reason to change it.

Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped.

(Default: 10 minutes)

Enable the Auto-reconnect option to automatically re-establish the connection as soon as you attempt to access the Internet again.

Image 36

Philips CPWBS001 manual Point-to-Point Tunneling Protocol Pptp

Contents

Wireless Base Station ➊ ➋ Helpline Table of Contents Reset button PowerIndicator LEDs Technology for people Safety Precautions Packaging contentsImportant information Environmental information Disclaimer Do not make any hardware connections to the Wireless Base Station until the Setup Wizard asks you to do soStart installing the software You make any hardware connections How to use the Setup programme Hardware description System Requirements Connect the System Basic Installation Procedure Connecting the Wireless Base Station Attach to Your Network Using Ethernet Cabling Attach to Your Network Using Radio Signals Attach the Wireless Base Station to the Internet Modem / Internet port on the Wireless Base StationEnds for all connections Connecting the Power Adapter Installing TCP/IP Setting Up TCP/IPWindows Configuring Your Computer in Windows 98SE/Me Dhcp IP Configuration Obtain IP Settings from Your Wireless Base Station Configuring Your Computer in Windows Configuring Your Computer in Windows XP Dhcp IP Configuration Configuring a Macintosh Computer Manual IP Configuration for all Windows OS Verifying Your TCP/IP Connection Ping Browser Configuration Disable Proxy ConnectionInternet Explorer 5 or above Internet Explorer for Macintosh Setup, virtual DMZ hosts, and other advanced functions Making Configuration ChangesNavigating the Web Browser Interface DSL modem Setup Wizard Time ZoneBroadband Type Cable Modem Fixed-IP xDSL PPPoE xDSL Click Finish to complete the setup Pptp Point-to-Point Tunneling Protocol Menu Description Password Settings System Factory defaults. The default is no password Default 9 minutesRemote Management Base Station Internet Settings Dynamic IP Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP DNS Local netwerk LAN Wireless Channel and Ssid Default Fully Automatic Available options are 1, 2, 5.5, and 11Mbps. Default AllCommunicates with PCs in its service range. Default Auto Available channel settings are limited by local regulations Encryption Network Address Translation NAT Address Mapping Virtual Server Special Applications 6112Battle.net 28800 Access Control Firewall As shown in the following screen MAC Filtering Table Parental Control Schedule Rule Enables Schedule-based Internet access control Use this section to create your network schedule rules Firewall Configuration Intrusion Detection DMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Configuration Tools Tools Tools Firmware Upgrade Tools Reboot Complete when the power LED stops blinking Following items are included on this screen StatusSection Description Displays Internet connection type and status Troubleshooting Am getting an IP Address that starts with Have another IP Address displayed 10/100 LED does not light after a connection is made Media Access Control LED IndicatorsRF Specification Standards RF Output Power RF Power ConsumptionRF Frequency Operating Channel English 0682