Black Box 8-port 10/100base-tx hardened ethernet extender switch Command Syntax restore default

Chapter 6: Command Line Console Management

switch_a#write config-file 192.168.1.100

switch_a#

Save Configuration:

1.Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a#

2.Usage:

Use copy running-config startup-config command to write configurations to the file to be used at startup. This is the same as the write memory command.

3. Command Syntax:

copy running-config startup-config

4. Example:

The following example specifies writing configurations to the file to be used at startup to Hardened Ethernet Extender Switch:

switch_a#copy running-config startup-config

switch_a#

Restore Default:

1.Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a#

2.Usage:

Use restore default command to restore default setting of the Hardened Ethernet Extender Switch.

3.Command Syntax: restore default

LB308A 724-746-5500 blackbox.com Page 121