Siemens MC55 manual At+Cgauto=?, At+Cgauto?, +CGAUTO n, AT+CGAUTO=n, AT+CGANScommand

MC55 AT Command Set

10.4 AT+CGAUTO

s

mobile

10.4AT+CGAUTO Automatic response to a network request for PDP context activation

Syntax

Test Command

AT+CGAUTO=?

Response(s)

+CGAUTO: (list of supported <n>s)

OK

Read Command

AT+CGAUTO?

Response(s)

+CGAUTO: <n>

OK

Write Command

AT+CGAUTO=[<n>]

Response(s)

OK ERROR +CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

GSM 07.07

Command Description

The test command returns the values of <n> supported by the MT as a compound value.

The write command disables or enables an automatic positive response (auto-answer) to the receipt of a Request PDP Context Activation message from the network. It also provides control over the use of the V.25ter basic commands ATS0, ATA and ATH for handling network requests for PDP context activation.

Parameter Description

<n>(num)

0	Disable automatic response for network requests for GPRS PDP context acti-
	vation. GPRS network requests are manually accepted or rejected by the
	AT+CGANScommand.
MC55_ATC_V01.05	Page 249 of 469	2/10/04
Confidential / Released