<line>(num)
Selects the line to be used for outgoing calls.
[1]ALS Line 1
2ALS Line 2
Notes
1
0(&F)
Controls the presentation mode of the URC "^SALS" which indicates the line number used by an incoming call: Disables indication of the called line
Enables indication of the called line
The write command enables or disables the presentation mode of <view> and selects the preferred <line>.
Parameter Description <view>(num)
8.9 AT^SALS
s
mobile
MC55 AT Command Set

The selected <line> will be saved at non-volatile Flash memory and thus retained after Power Down.

The <line> will be reset by AT&F and ATZ and afterwards saved at non-volatile memory too.

The <view> will be reset after Power Down as well as by ATZ or AT&F.

If a non ALS SIM is inserted, the <line> will be reset to line 1 as well.

Example

AT^SALS=1,1

Line 1 has been selected for outgoing calls. "^SALS" URC is enabled.

RING

You receive a notification that you have an incoming call on line 2.

^SALS: 2

 

 

 

MC55_ATC_V01.05

Page 206 of 469

2/10/04

Confidential / Released

 

 

Page 206
Image 206
Siemens MC55 manual ATSALS=1,1, Sals