Atsnfm Set microphone audio path and power supply | Siemens MC55

MC55 AT Command Set

16.12 AT^SNFM

s

mobile

16.12AT^SNFM Set microphone audio path and power supply

Syntax

Test Command

AT^SNFM=?

Response(s)

^SNFM: (list of supported <MicSwitch>s) , (list of supported <MicVccCtl>s)

OK

Read Command

AT^SNFM?

Response(s)

^SNFM: <MicSwitch>, <MicVccState>

OK

Write Command

AT^SNFM=[<MicSwitch>] [, <MicVccCtl>]

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

Reference(s)

SIEMENS

Command Description

The test command returns the supported values of the parameters <MicSwitch> and <MicVccCtl>.

The read command returns the microphone mute and supply voltage status.

Value of <MicSwitch> is valid during a voice call only.

The write command can be used to switch the microphone's audio path (muted / not muted) or to control the power supply of the MICP2 line (microphone input of the second analog audio interface).

MC55_ATC_V01.05	Page 408 of 469	2/10/04
Confidential / Released

Image 408

Siemens MC55 manual Atsnfm Set microphone audio path and power supply, Atsnfm=?, Atsnfm?, Snfm MicSwitch, MicVccState

Contents

MC55 MC55 AT Command Set Contents AT+CSCS AtscfgATSM20 AT+CMER Atspic AT+CLCKAtslck AT+CPWD AT+CR AT+CRCAT+CSNS Atscni AT+CGACT AT+CGANSAT+CGAUTO AT+CGDATA AT+FOPT AT+FREVAT+FRH AT+FRM Atssta AtsstgiAtsstr AT+CPBR Atsctm AtssyncATS3 ATS4 List of Tables List of Figures Introduction Scope of the document Related documents Document conventions Quick reference tablePIN Superscript notation for parameters and values AT command syntax Using parametersAT+CXXX=? AT+CXXX? Combining AT commands on the same command line Supported character sets IRA Ascii BSPNull GSM alphabet tables and UCS2 character values Mobile 2 UCS2 and GSM data coding and conversion for SMS text mode CscsGSM UCS2 Cscs GSM UCS2 Mobile Flow Control Software flow control XON/OFF flow controlHardware flow control RTS/CTS flow control Unsolicited Result Code Presentation Communication between Customer Application and MC55 Common PCN Handset Specification Cphs CSP Errors and Messages Configuration Commands AT&FvalueValuenum AT&V Display current configuration 1 AT&V responsesAT&Vvalue Active Profile Active Profile +FCLASS+CGSMS ERROR/+CME Error err AT&Wvalue ATQ Set result code presentation mode ATQn ATV Set result code format mode Verbose and numeric result codesATVvalue If value=0 If value=1 Connect 2400/RLP Connect 4800/RLPConnect 9600/RLP Connect 14400/RLP ATX Set Connect result code format and call monitoring ATXvalue ATZ Set all current parameters to user defined profile ATZvalue OK Error +CME Error AT+CFUN Set phone functionalityAT+CFUN=? +CFUN fun Funnum Rstnum AT+CFUN=0 +CMTI SM,5AT+CFUN? +CFUN AT+CFUN=1 AT+CFUN=1,1 Wake up the ME from Sleep mode Fun=0URC Atsmso Switch off mobile station ATSMSO=?Atsmso Smso MS OFF OK 10 AT+GCAP Request complete TA capabilities list AT+GCAP=?AT+GCAP +GCAP name 11 AT+CMEE Report mobile equipment error OK ErrorAT+CMEE=? AT+CMEE? Summary of CME Errors related to GSM AT+CMEE=2 Summary of GPRS-related CME Errors Summary of CMS Errors related to GSM No +CNMA ACK Expected Mobile 12 AT+CSCS Select TE character set AT+CSCS=?AT+CSCS? Also see chapter Supported character sets Atscfg Extended Configuration Setting +CME Error operation temporary not allowedATSCFG=? ATSCFG? Scfg PowerSaver/Mode9/Timeout, cfun9-timeout URC indication via Ring line ATSCFG=URC/Ringline, uri Cfun9-timeoutstr+CSCS HandOverStatusstr+CSCS SCFGAudio/AMR,enabled AT+CSCS=UCS2SCFGAudio/AMR,0065006E00610062006C00650064 AT+CSCS=GSM ATSCFG? AT+CSCS=GSM ATSM20 Set M20 compatibility mode ATSM20=?ATSM20? SM20CallMode, CmgwMode CallModenum CmgwModenum Status Control Commands AT+CMER Mobile Equipment Event ReportingAT+CMER=? AT+CMER? +CIEV indDescr, indValue Mobile AT+CIND Indicator control AT+CIND=?AT+CIND? Command Description Also refer Call Status Information StatenumATSLCC, AT+CLCC or Atscni AT+CPIN=9999 ATD0123456 +CIEV sounder,1+CIEV call,1 +CIEV sounder,0 +CIEV call,0 No Carrier Atsind Extended Indicator Control ATSIND=indDescr, ModeATSIND=? ATSIND? User Issued AT+CEER Extended error report AT+CEER=?AT+CEER +CEER locationID, reason, ssRelease AT+CHLD=2 OK AT+CHLD=3 Cause Location ID for the extended error report AT+clck=oi,1,0000,3 +CME Error incorrect password+CEER 35,0,43 GSM release cause for L3 Radio Resource RR Siemens release cause for L3 Radio Resource RR GSM release cause for Mobility Management MM Siemens release cause for L3 Mobility Management MM GSM release cause for L3 Call Control CC Mobile Siemens release cause for L3 Call Control CC Siemens release cause for L3 Advice of Charge AOC GSM Release cause for Supplementary Service Call Mobile Siemens release cause for Session Management SM GSM cause for L3 Protocol module or other local cause Siemens release cause for Gprs APISiemens release cause for Embedded Netcore ATS18 Extended call release report ATS18?ATS18=n +CAUSE locationID, reason Busy Connect 9600/RLP AT+CPAS Mobile equipment activity status AT+CPAS=?AT+CPAS +CPAS pas AT+WS46 Select wireless network AT+WS46=?AT+WS46? AT+WS46=n Serial Interface Control Commands ErrorAT\Q Flowcontrol AT\Qn AT&C Set circuit Data Carrier Detect DCD function mode AT&Cvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Dvalue AT&S Set circuit Data Set Ready DSR function mode AT&Svalue ATE Enable command echo ATEvalue AT+ILRR Set TE-TA local rate reporting AT+ILRR=?AT+ILRR? Ratenum AT+IPR Set fixed local rate AT+IPR=?AT+IPR? +IPR rate Chronized after restarting the GSM engine see chapter Autobauding AT+CMUX Enter multiplex mode +CMUX modeAT+CMUX=? AT+CMUX? Restrictions on Multiplex mode Subsetnum+++ ATS6 ATS7ATS8 ATS10 Second serial interface ASC1 AT+CFUN Security Commands AT+CPIN Enter PINAT+CPIN=? AT+CPIN? Pinstr New pintextCodetext What to do if PIN or password authentication fails? PH-SP PUKPH-C PIN PH-C PUK Mobile AT+CPIN2 Enter PIN2 AT+CPIN2=?AT+CPIN2? +CPIN2 code New pinstr AT+CPWD=P2,0000,8888AT+CPIN2? +CPIN2 SIM PUK2 AT+CPIN2=12345678,8888 +CME Error AT+CPBS=FDAT+CPBW=2,+493012345678,145,Charly AT+CPIN2=8888 AT+CPBW=2,+493012345678,145,Charly Atspic Display PIN counter ATSPIC=?ATSPIC? Atspic Counternum Facilitystr +CPIN SIM PIN +CPIN SIM PUK At+cpin=9999 OK at+cpin? At+cpin=4714 +CME Error incorrect password Atspic Spic AT+CLCK=facility, mode, password, class AT+CLCK Facility lockAT+CLCK=? Phone security locks set by client or factory Factory defined SIM locks Passwordstr StatusnumClassnum SMS AT+CLCK=SC,2 AT+CPIN? +CPIN SIM PIN AT+CPIN=1111 AT+CPIN? +CPIN PH-SIM PINAT+CPIN=3333 AT+CLCK=PS,0,3333 ATSLCK=facility, mode, password, class Atslck Facility lockATSLCK=? AT+CPWD Change Password +CPWDlist of supported facility, password lengthAT+CPWD=facility, old password, new password +CME Error 16 +CME Error incorrect password Password length 4 to 8 digits Password length 4 digits Password lengthnum Old passwordstrNew passwordstr AT+CPWD=AO,0000,3333 AT+CPWD=PS,1111,2222AT+CPWD=PS,12345678,1111 AT+CPWD=PS,12345678 Atspwd Change Password SPWDlist of supported facility, password lengthATSPWD=facility, old password, new password ATSPWD=? Identification Commands ATI Display product identification informationATI ATIvalue AT+CGMI Request manufacturer identification AT+CGMI=?AT+CGMI AT+GMI Request manufacturer identification AT+GMI=?AT+GMI AT+CGMM Request model identification AT+CGMM=?AT+CGMM AT+GMM Request TA model identification AT+GMM=?AT+GMM AT+CGMR Request revision identification of software status AT+CGMR=?AT+CGMR Xx.yystr AT+GMR=? AT+GMRXx.yytext AT+CGSN=? AT+CGSN AT+GSN=? AT+GSN 10 AT+CIMI Request international mobile subscriber identity AT+CIMI=?AT+CIMI Imsi Call related Commands Call Status Information Call Status Information Connect text TA switches to data mode ATA Answer a callATA Textstr ATDnmgsm No DialtoneConnect text Mgsmstr ATD03022222222 ATDmemn Originate call to phone number in memory ATDmemnmgsmMemstr AT+CPBR=1,xx ATDSM15ATDLD9 Memory Mobile Sponding field ATDstrmgsm Mobile Atdi Mobile originated call to dialable Isdn number n ATDIn Atdl Redial last telephone number used Atdl ATH Disconnect existing connection ATHn 10 AT+CHUP Hang up call AT+CHUP=?AT+CHUP Call ATS0?ATS0=n Mobile 12 ATS6 Set pause before blind dialing ATS6?ATS6=n ATS7? ATS7=n ATS8? ATS8=n Carrier ATS10?ATS10=n ATP Select pulse dialing ATP ATO Switch from command mode to data mode / PPP online mode ATOn 18 +++ Switch from data mode to command mode ATT Select tone dialing ATT 20 AT+CBST Select bearer service type AT+CBST=?AT+CBST? +CBST speed, name, ce 14400 bps Parent data call AT+CRLP=?AT+CRLP? +CRLP iws, mws, T1, N2, verx Verxnum 22 AT+CLCC List current calls of ME AT+CLCC=?AT+CLCC +CLCC idx, dir, stat, mode, mpty, number, type, alpha Mptynum NumberstrTypenum Mobile ATSLCC=? ATSLCC?Slcc n Atslcc ATSLCC=n Mobile originated call MOC Mobile terminated call MTC Traffic channel assignednum Alphastr Slcc Ring 24 AT+CR Service reporting control +CR modeAT+CR=? AT+CR? Servstr REL AsyncGprs +CRC mode AT+CRC=?AT+CRC? AT+CRC=mode Typestr FAXVoice +CSNS mode 26 AT+CSNS Single Numbering SchemeAT+CSNS=? AT+CSNS? Mobile Atscni List Call Number Information ATSCNI=?Atscni Scni id1,cs,number,type Scni id2,cs,number,type String type phone number in format specified by type Atslcd Display Last Call Duration ATSLCD=?Atslcd Slcd time Atstcd Display Total Call Duration ATSTCD=?Atstcd Stcd time Network Service Commands AT+COPN Read operator namesAT+COPN=? AT+COPN AT+COPS Operator selection AT+COPS=?AT+COPS? +COPSmode, format, oper Statnum Status Oper&V Operator Mobile AT+CREG Network registration AT+CREG=?AT+CREG? +CREG n, stat, lac, ci =2 +CREGstat,lac,ci Lacstr AT+CREG=2AT+COPS=0 +CREG 1,0145,291A AT+CSQ Signal quality AT+CSQ=?AT+CSQ +CSQ rssi,ber Mobile CME Error Atsmonc Cell MonitoringATSMONC=? Atsmonc Cellnum BSICnumChannnum Atmoni Monitor idle mode and dedicated mode ATMONI=?Atmoni ATMONI=period Atmoni responses Serving Cell Dedicated channel Chann rs DBmPlmn Chann TS timAdv PWR DBm Q ChMod Service states PWR Mobile Atmonp Monitor neighbour cells ATMONP=?Atmonp ATMONP=period Atmonp responses Chann DBmMCC MNC BCC 100 Atsmong Gprs Monitor ATSMONG=?Atsmong ATSMONG=table , period Atsmong Cell Info Table Gprs MonitorBcch Pbcch PAT MCC MNC NOM RAC # Cell # Atsals Alternate Line Service ATSALS=?ATSALS? Sals view, line ATSALS=1,1 Sals Atshom Display Homezone ATSHOM=?Atshom Shom homezonestate Atsplm Read the Plmn list ATSPLM=?Atsplm SPLMnumeric, long alpha Atsplr Read entry from the preferred operators list ATSPLR=?ATSPLR=index1, index2 Splr index1oper Splr index2oper Operstr Atsplw Write an entry to the preferred operators list ATSPLW=?ATSPLW=index, oper Indexnum Supplementary Service Commands AT+CACM Accumulated call meter ACM reset or queryAT+CACM=? AT+CACM? Acmstr Passwdstr Atsacm Advice of charge and query of ACM and ACMmax ATSACM=?Atsacm Sacm n, acm, acmMax Ffffff Ccmstr AT+CAMM Accumulated call meter maximum ACMmax set or query AT+CAMM=?AT+CAMM? +CAMM acmmax MC55ATCV01.05 217 10/04 Confidential / Released AT+CAOC Advice of Charge information AT+CAOC=?AT+CAOC? AT+CAOC Query CCM value AT+CCUG Closed User Group AT+CCUG=?+CCUGn, index, info AT+CCUG=n, index, info Infonum AT+CCFC=reason, mode , number, type, class, time AT+CCFC Call forwarding number and conditions controlAT+CCFC=? Not reachable Timenum At+ccfc=0,3,+493012345678,145 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2 At+ccfc=0,0At+ccfc=0,4 At+ccfc=0,2 +CCFC 0,1 +CCFC 0,2 +CCFC 0,4 AT+CCWA Call Waiting AT+CCWA=?AT+CCWA? AT+CCWA=n, mode, class +CCWA calling number, type of number, class, , CLI validity Scwa Calling numberstr Type of numbernumCLI validitynum At+ccwa=1 At+ccwa=,1At+ccwa=,2 At+ccwa=1,1 AT+CHLD Call Hold and Multiparty AT+CHLD=?AT+CHLD=n Udub At+ccwa=1,1,1 +CCWA +491791292364,145,32,,0At+chld=2 Ring ATA At+clccAt+clcc +CLCC 1,0,0,0,0,03038639268,129 AT+CLIP Calling line identification presentation AT+CLIP=?AT+CLIP? +CLIP number, type, , , , CLI validity Suppress unsolicited result codes 10 AT+CLIR Calling line identification restriction AT+CLIR=?AT+CLIR? +CLIRn, m Mnum 11 AT+CPUC Price per unit and currency table AT+CPUC=?AT+CPUC? +CPUC currency, ppu AT+CPUC=EUR,0.10 +CME Error SIM PIN2 required PpustrAT+CPUC=EUR,0.10,8888 AT+CPUC=EUR,0.10 12 AT+CSSN Supplementary service notifications AT+CSSN=?AT+CSSN? +CSSI code Code 1num Code 2num 13 AT+CUSD Supplementary service notifications AT+CUSD=?AT+CUSD? AT+CUSD=n, str, dcs Strstr Dcsnum Gprs Commands 10.1 AT+CGACT PDP context activate or deactivateAT+CGACT=? AT+CGACT? Cidnum AT+CGANS=? AT+CGANS=response, L2P, cidResponsenum L2Pstr Mobile 10.3 AT+CGATT Gprs attach or detach AT+CGATT=?AT+CGATT? +CGATT state State=1 AT+CGANScommand AT+CGAUTO=?AT+CGAUTO? +CGAUTO n Below Connect No Carrier Error +CME Error 10.5 AT+CGDATA Enter data stateAT+CGDATA=? Parameter Description 10.6 AT+CGDCONT Define PDP Context AT+CGDCONT=?AT+CGDCONT? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp PDPtypestr APNstrPDPaddrstr Dcompnum +CGPADDR OK Error +CME Error 10.7 AT+CGPADDR Show PDP addressAT+CGPADDR=? +CGPADDR cid, PDPaddress +CGQMIN cid, precedence, delay, reliability, peak, mean AT+CGQMIN=cid, precedence, delay, reliability, peak, meanAT+CGQMIN=? AT+CGQMIN? Delaynum Delay class CidPrecedencenum Precedence class Reliabilitynum Reliability class PeaknumMeannum AT+CGDCONT=1,ip AT+CGQMIN= AT+CGQMIN? AT+CGQMIN=1,0 10.9 AT+CGQREQ Quality of Service Profile Requested +CGQREQ cid, precedence, delay, reliability, peak, meanAT+CGQREQ=cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Reliabilitynum Peaknum AT+CGQREQ= AT+CGQREQ? AT+CGQREQ=1,0 10.10 AT+CGREG Gprs network registration status AT+CGREG=?AT+CGREG? +CGREG n, stat Stat=1 or stat=5 10.11 AT+CGSMS Select service for MO SMS messages +CGSMS serviceAT+CGSMS=? AT+CGSMS? Circuit switched Atsgauth Set type of authentication for PPP connection ATSGAUTH=?ATSGAUTH? Atsgconf Configuration of Gprs related Parameters ATSGCONF=?ATSGCONF? Sgconf llcpdulength, class Mobile Connect No Carrier 10.15 ATD*99# Request Gprs service ATD*99* calledaddress* L2P* cid #Calledaddressstr PPP Cidnum 10.16 ATD*98# Request Gprs IP service ATD*98* cid # ATH 10.18 ATS0 Mobile Using Gprs AT commands Examples AT+CGDCONT=1,IPAT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGDCONT=1 AT+CGQREQ=1,2 AT+CGQREQ=1AT+CGACT=1,2 AT+CGACT= Using the Gprs dial command ATD ConnectBy AT+CGDCONT FAX Commands FAX parametersAT+FCLASS Parameter EIA/TIA-578-A Modnum 40 ms 11.2 AT+FBADLIN Bad Line Threshold AT+FBADLIN?Badlin AT+FBADLIN=badlin 11.3 AT+FBADMUL Error Threshold Multiplier AT+FBADMUL?Badmul AT+FBADMUL=badmul 11.4 AT+FBOR Query data bit order AT+FBOR=?AT+FBOR? Bor AT+FCIG=? AT+FCIG?AT+FCIG=id AT+FCLASS=? AT+FCLASS?AT+FCLASS=n EIA/TIA-592-A Mobile 11.7 AT+FCQ Copy Quality Checking AT+FCQ=?AT+FCQ? AT+FCQ=cq 11.8 AT+FCR Capability to receive AT+FCR=cr 11.9 AT+FDCC Query or set capabilities AT+FDCC=?AT+FDCC? Vr, br, wd, ln, df, ec, bf, st 11.10 AT+FDFFC Data Compression Format Conversion AT+FDFFC=?AT+FDFFC? AT+FDFFC=df 11.11 AT+FDIS Query or set session parameters AT+FDIS=?AT+FDIS? AT+FDIS=vr, br, wd, ln, df, ec, bf, st 11.12 AT+FDR Begin or continue phase C data reception Connect or If error related to ME functionalityAT+FDR 11.13 AT+FDT Data Transmission AT+FDTAT+FDT=df, vr, wd, ln 11.14 AT+FET End a page or document AT+FET=ppmPpmnum 11.15 AT+FK Kill operation, orderly FAX abort AT+FK AT+FLID=? AT+FLID?Lid AT+FLID=lid 11.17 AT+FMDL Identify Product Model AT+FMDL?Gipsy Soft Protocolstack 11.18 AT+FMFR Request Manufacturer Identification AT+FMFR?Siemens 11.19 AT+FOPT Set bit order independently AT+FOPT=optOptnum 11.20 AT+FPHCTO DTE Phase C Response Timeout AT+FPHCTO?Tout AT+FPHCTO=tout 11.21 AT+FREV Identify Product Revision AT+FREV?V2.550 11.22 AT+FRH Receive Data Using Hdlc Framing AT+FRH=modTIA/EIA-578 11.23 AT+FRM Receive Data AT+FRM=?AT+FRM=mod 11.24 AT+FRS Receive Silence AT+FRS=time 11.25 AT+FTH Transmit Data Using Hdlc Framing AT+FTH=mod 11.26 AT+FTM Transmit Data AT+FTM=?AT+FTM=mod 11.27 AT+FTS Stop Transmission and Wait AT+FTS=time 11.28 AT+FVRFC Vertical resolution format conversion AT+FVRFC=?AT+FVRFC? Vrfc Short Message Service SMS Commands SMS parametersAckpdunum Cdatanum Lengthnum Mem1strMem2str Mem3str Pagenum PagesnumPdunum Sctsnum Statstr TodanumTooanum Toranum 12.2 AT+CMGC Send an SMS command Error +CMS ErrorAT+CMGC=? +CMGC mr, scts OK Error +CMS Error 12.3 AT+CMGD Delete SMS messageAT+CMGD=? AT+CMGD=index +CMGF mode 12.4 AT+CMGF Select SMS message formatAT+CMGF=? AT+CMGF? 12.5 AT+CMGL List SMS messages from preferred store AT+CMGL=?AT+CMGL Mobile 12.6 AT+CMGR Read SMS messages AT+CMGR=?+CMGR stat, fo, mr, ra, tora , scts, dt, st data +CMGR stat, fo, ct , pid, mn, da, toda, length data Mobile 12.7 AT+CMGS Send SMS message AT+CMGS=?+CMGS mr, scts +CMGS mr, ackpdu Mobile 12.8 AT+CMGW Write SMS messages to memory AT+CMGW=?AT+CMGW +CMGW index Command Description 12.9 AT+CMSS Send SMS messages from storage AT+CMSS=?AT+CMSS=index , da, toda +CMSS mr, scts AT+CNMA=? AT+CNMAAT+CNMA=n Mobile 12.11 AT+CNMI New SMS message indications AT+CNMI=?AT+CNMI? +CBM lengthCRLFpdu +CBM sn, mid, dcs, page, pagesCRLFdata+CDS lengthCRLFpdu +CDS fo, mr, ra, tora, scts, dt, st Ward them directly to the TE Mobile OK Error Error +CMS Error 12.12 AT+CPMS Preferred SMS message storageAT+CPMS=? AT+CPMS? Used2num Used3numTotal1num Total2num Mobile 12.13 AT+CSCA SMS service centre address AT+CSCA=?AT+CSCA? +CSCA sca, tosca 12.14 AT+CSCB Select Cell Broadcast Message Indication AT+CSCB=?AT+CSCB? +CSCB mode, mids, dcss Dcssstr 12.15 AT+CSDH Show SMS text mode parameters AT+CSDH=?AT+CSDH? Not show pid , mn , da , toda , length or cdata 12.16 AT+CSMP Set SMS text mode parameters AT+CSMP=?AT+CSMP? +CSMPfo, vp/ scts, pid, dcs Pidnum 12.17 AT+CSMS Select Message Service AT+CSMS=?AT+CSMS? Mobile Terminated Messages Type not supported Type supported Atslms List SMS Memory Storage ATSLMS=?Atslms Used2num ATSMGL=? AtsmglATSMGL=stat Smgo n, mode Error CME ErrorATSMGO=? ATSMGO? SMS overflow presentation mode Atsmgr Read SMS message without setting status to REC Read ATSMGR=?Smgr ATSMGR=index Atssconf SMS Configuration ATSSCONF=?ATSSCONF? SSCONFra Mobile Atssda Set SMS Display Availability ATSSDA=?ATSSDA? SSDAda Danum Atssmss Set Short Message Storage Sequence ATSSMSS=?ATSSMSS? Ssmss seq SIM related Commands 13.1 AT+CRSM Restricted SIM AccessAT+CRSM=command, fileID, P1, P2, P3, data AT+CRSM=? FileIDnum DatastrSw1num Sw2num Atscks Query SIM and Chip Card Holder Status ATSCKS=?ATSCKS? Scks mode, SimStatus SimStatusnum&V ATSCKS=1Scks Atscid Display SIM card identification number ATSCID=?Atscid Scid cid 13.4 AT+CXXCID Display card ID AT+CXXCID=?AT+CXXCID +CXXCID cid SIM Application Toolkit SAT Commands Atssta SAT Interface ActivationATSSTA=? ATSSTA? Alphabetnum AllowedInstancenumSatProfilestr Sstn SAT Notification Sstn cmdTypeSstn cmdTerminateValue Sstn CmdTypenum CmdTerminateValuenum Atsstgi SAT Get Information ATSSTGI=?ATSSTGI? Sstgi state, cmdType Related Proactive Command Atsstr SAT Response ATSSTR=?ATSSTR? Sstr state, cmdType InputNumbernum InputStringstr Phonebook Commands Sort Order for Phonebooks 15.2 AT+CPBR Read from Phonebook AT+CPBR=?+CPBR 1-maxloc,nlength, tlength AT+CPBR=location1, location2 Location1num Location2numTypenum Address type Maxlocnum Tlengthnum +CPBR2,+777777,145,Bill +CPBR3,+888888,145,Arthur 15.3 AT+CPBS Select phonebook memory storage AT+CPBS=?AT+CPBS? +CPBS storage, used, total Storagestr UsednumTotalnum 15.4 AT+CPBW Write into Phonebook AT+CPBW=?+CPBW 1-maxloc,nlength, list of supported types, tlength AT+CPBW=location, number, type, text Locationnum AT+CPBW=,+431234567,145,international AT+CPBW=1 Atspbc Search the first entry in the sorted telephone book ATSPBC=?ATSPBC=schar Spbc index Scharstr+CSCS Atspbd Purge phonebook memory storage ATSPBD=?ATSPBD=storage Storagestr Atspbg Read current Phonebook entries ATSPBG=?Spbg 1-used,nlength, tlength ATSPBG=index1, index2, RealLocReq RealLocReqnum Spbg 1-33,20,17 ATSPBG=1,33 ATSPBG=1,33,1 AT+CPBR=27+CPBR 27,+999999,145,Arthur Atspbs Step through the selected phonebook alphabetically ATSPBS=?ATSPBS=value, RealLocReq Counter value Index-b=index-a+1Index-c=index-b+1 Internal-counternum At&f +CPBR27,+999999,145,Arthur Atsdld Delete the last number redial memory ATSDLD=?Atsdld Audio Commands Audio programming model ATL Set monitor speaker loudness ATLvalValnum ATM Set monitor speaker mode ATMval 16.4 AT+CLVL Loudspeaker volume level AT+CLVL=?AT+CLVL? AT+CFUN=1,1 16.5 AT+CMUT Mute control AT+CMUT=?AT+CMUT? 16.6 AT+VTD Tone duration AT+VTD=?AT+VTD? Duration 16.7 AT+VTS Dtmf and tone generation AT+VTS=?AT+VTS=dtmfString AT+VTS=dtmf, duration Mobile Atsaic Audio Interface Configuration ATSAIC=?ATSAIC? Saic io, mic, ep Microphone selection Atsnfa Set or query of microphone attenuation ATSNFA=?ATSNFA? OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 OK atsnfa? Snfa Atsnfd Set audio parameters to manufacturer default values ATSNFD=?Atsnfd Atsnfi Set microphone path parameters ATSNFI=?ATSNFI? Snfi inBbcGain, inCalibrate Mobile Atsnfm Set microphone audio path and power supply Snfm MicSwitch, MicVccStateATSNFM=MicSwitch , MicVccCtl ATSNFM=? MicSwitchnum MicVccCtlnumMicVccStatenum Atsnfo Set audio output = loudspeaker path parameter ATSNFO=?ATSNFO? OutBbcGainnumSNFW OutCalibratenumSNFW OutStepnum Atsnfpt Set progress tones ATSNFPT=?ATSNFPT? Snfpt pt Atsnfs Select audio hardware set ATSNFS=?ATSNFS? Snfs audMode Atsnfd restores audMode ATSNFS=4 ATSAIC? ATSNFS=2 ATSAIC?Atsnfw ATSNFS=4 ATSAIC=2,1,1 Atsnftty Switch audio path to TTY/CTM mode ATSNFTTY=?ATSNFTTY? Snftty state Audio path is in normal speech mode Atsnfv Set loudspeaker volume ATSNFV=?ATSNFV? Snfv outStep MC55ATCV01.05 420 10/04 Confidential / Released Atsnfw Write audio setting in non-volatile store ATSNFW=? Atsrtc Ring tone configuration ATSRTC=?ATSRTC? Atsrtc Volumenum Mobile Hardware related Commands 17.1 AT+CALA Set alarm timeAT+CALA=? AT+CALA? Sysstart Alarm Mode +CALA text +CALA text AT+CALA=04/05/31,093000,0,0,Good Morning +CALA Good Morning Summary of AT commands available in Alarm mode Sysstart Alarm ModeAT+CALA=04/05/31,085000 AT+CALA=04/05/20,083000 Error OK 17.2 AT+CCLK Real Time ClockAT+CCLK=? AT+CCLK? Atsbc Battery charging / discharging and charge control ATSBC=?ATSBC? SBC bcs, bcl, mpc SBC Undervoltage Bcsnum Bclnum MpcnumCurrentnum Atsbv Battery/Supply Voltage ATSBV=?Atsbv SBV value ATSCTM=? ATSCTM?Sctm n, m ATSCTM=n Sctma m Sctmb m Sctma Sctmb Atssync Configure Sync Pin ATSSYNC=?ATSSYNC? SSYNCmode ME status indicated by status LED patterns Atssync parameter mode= Miscellaneous Commands 18.1 A/ Repeat previous command line 18.2 ATS3 Write command line termination character ATS3?ATS3=n 18.3 ATS4 Set response formatting character ATS4?ATS4=n 18.4 ATS5 Write command line editing character ATS5?ATS5=n Restricted access to SIM data after SIM PIN authentication AppendixATDmemn List of *# Codes Imei OKSee AT+CLIR Like +CCWA *see AT+CCWA FAX SMS SMS+FAX PAD Mobile Available AT Commands and Dependency on SIM PIN ATDmemn ATDn ATDstr ATS7 ATS8 ATS10 ATP ATO ATD*99# ATD*98# Short Message Service SMS Commands AT+CRSM Atscks Atscid AT+CXXCID AT+CALA AT+CCLK Atsbc Atsbv Atsctm Atssync AT Command Settings storable with AT&W Mode, mt, bm, ds, bfr Show ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F Format=0 View=0=0, m=0 Mode=0, mt=0, bm=0, ds=0, bfr=1 ATS3 Summary of Unsolicited Result Codes URC Smgo mode +CMT oa, scts, tooa, fo, pid, dcsSca, tosca, lengthCRLFdata Sstn Alphabetical List of AT Commands AT+CMGC AT+FBADLIN 23, Atssta ATD*99# ATT