Siemens MC55 manual Atdi Mobile originated call to dialable Isdn number n, ATDIn

MC55 AT Command Set

7.7 ATDI

s

mobile

7.7 ATDI Mobile originated call to dialable ISDN number <n>

Syntax

Exec Command

ATDI<n>[<;>]

Response(s)

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

If successfully connected and non-voice call (TA switches to data state):

CONNECT <text>

When TA returns to command mode after call release:

OK

If successfully connected and voice call:

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

V.25ter

Command Description

TA attempts to set up an outgoing call to ISDN number.

Parameter Description

<n>(str)

ISDN number [+]<d>

String with maximum length of 20 characters. Allowed characters: +: international dialing format

<d>: 0-9, A, B, C

<;>(str)

voice call.

Note

•This command maybe aborted generally by receiving a character during execution. Abortion is not possible during some states of connection setup such as handshaking.

MC55_ATC_V01.05	Page 149 of 469	2/10/04
Confidential / Released