Siemens MC55 manual Atspbd Purge phonebook memory storage, Atspbd=?, ATSPBD=storage

MC55 AT Command Set

15.6 AT^SPBD

s

mobile

15.6AT^SPBD Purge phonebook memory storage

This command is used to purge the selected phonebook <storage> manually, i.e. all entries previously stored in the selected phonebook storage will be deleted.

CAUTION! The operation cannot be stopped nor reversed!

Automatic purging of phonebooks is performed when the SIM card is removed and replaced by a different SIM card. This affects the ME-based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not affected.

This command can be used only after the phonebook data from the SIM have been read successfully for the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com- mands will result in "+CME Error: 14" (SIM busy).

Syntax

Test Command

AT^SPBD=?

Response(s)

^SPBD: list of supported <storage>s

OK

+CME ERROR

Write Command

AT^SPBD=<storage>

Response(s)

OK

+CME ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

SIEMENS

Command Description

The test command returns a list of supported <storage>s.

The write command is used to select the phonebook <storage> to be purged.

MC55_ATC_V01.05	Page 381 of 469	2/10/04
Confidential / Released